By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for bees

Here is a list of all the postings bees has made in our forums. Click on a thread name to jump to the thread.

Thread: Ben Buckle kits.
13/05/2020 21:19:29

Thanks guys that was what i was hoping for. I fly all electric these days so iam going to convert it to electric. Pete, obviously i want to turn off the motor and extend the flight time even more, did read some where that it would thermal in the right conditions would you say that is correct. Thank you.


Edited By bees on 13/05/2020 21:20:26

13/05/2020 20:49:54

Hi, iam thinking off purchasing the Playboy senior but have been looking through some rather old threads regarding poor quality and fitment of various parts.Was wondering if they have addressed this problem in the more recent kits.Thank you for any advice.

Thread: The Atom Special
21/04/2020 20:51:06

Okay thank you.

21/04/2020 20:20:30

Thank you, could you please comfirm that the blades are 600mm chord wise but what length regarding span wise

21/04/2020 15:24:20

Hi, Iam in the the process of building the Atom and was wondering it would be okay to fly with out the canopy leaving a open cockpit, Thank you.

Thread: Ripmax Phase 5e
26/02/2020 19:52:41

Not got that far yet but will try 3s first has i have them spare then try 4s.

26/02/2020 19:31:36

After having the phase -5 bought for christmas i had a quick check for any damage and then put it on the back burner till i finished another build.How ever having started the Phase-5 build and getting round to connecting ailerons, flaps i have found a twist in the inboard side of the aileron on both wings. Has anybody else experienced this, so disappointed with this model.

02/01/2020 22:08:20
Posted by Jeremy Scott-hake on 02/01/2020 19:21:04:

I got one of these from Wings and Wheels in the summer .

I have kitted it out with Axi 2826/10 hobbywing 40 amp speed control Hitec 85mg on the tail Savox servos in the wing .

I use 4s 4000 ma Optipower lipos also used in Wot4.

The flaps are very effective also crow brakes are even more effective! I have programmed the flaps to aeleron. On a switch the roll rate is phenomenal.

All movements set to recommened in manual.

One of my favourites at the moment. It rolls vertically at 3/4 throttle!

You will be very happy with it

Thats nice to know, Was a bit a concerned after reading earlier posts regarding the weakness at the front end.

02/01/2020 15:57:11

Hi, After trying to make my mind up if to purchase the Phase 5-e my wife made it up for me and bought one for christmas. Looking forward to building and flying and have taken note regarding beefing up the nose area and trying to strengthen the cowling.

14/09/2019 21:45:55

Thank you for your evaluation of the Phase-5. Might still be tempted knowing that you can beef up the front end during assembly. Please keep your comments coming.

13/09/2019 22:32:45

I was allso interested in the Phase-e and it looks like it flys well after seeing a recent video but having seen your problems after a bumpy landing really puts me off. I would have thought from a renowned designer the front end would have been a bit stronger to accommodate the motor.

Thread: Chris williams ASK-11
15/12/2018 09:16:59

Hi, I never expected it to be a all out thermal machine but if it catches the odd thermal and can get longer flight times by just toogling along on low throttle than that will suit me. One more question if i may and that is regarding the stall , has got any nasty surprises such as a tendency to tip stall. Thank you.

14/12/2018 20:03:54

Hi, Thank you for your feed back, regarding your video i have watched numerous times looks like it flys well. Could you tell me how well it thermals . Thank you.

14/12/2018 16:55:41

Hi, Couple of years ago i was looking to build the ASK-11 glider but never got round to it but now i have more time on my hands so iam asking how difficult is this glider to build regarding wing joiner, any wash out in wings and so on. I class myself as a intermediate builder but don't want to set something on i can not finish. Was hoping to get in touch with Chris via scale soaring but can not post a question so was hoping somebody or chris might respond on this forum. Thank you for any help.

Thread: Cambrian models funfighters
04/06/2018 15:05:32

Even something like the cambrian models where it needs a good launch. When i can i usually launch myself but if needing a hefty launch i let a clubfeet launch it.

04/06/2018 15:00:37

I suppose regarding launching if i can not launch myself i am going to need a helper every time not good if i want to fly alone.

04/06/2018 14:11:36

Okay thanks. I think weston park is coming up pretty soon so might get a closer look at both hopefully.

04/06/2018 13:50:48

Sorry guys i have mislead you slightly. First it has to be electric, second i was looking at something to build myself and iam not too bothered about all out speed as i have a couple of models that are ballistic. I looked at the Me-109 simple because you built it yourself (something to past my time with in the evenings) and it looked something like scale. my main concern is does it fly well and how fast does in come in when landing. Been on Cambria funfighters website but not a lot of imfo, are these models better than cambrian gunfighters.

03/06/2018 22:28:40

Hi, so which model are you talking about in your previous post. have been looking at the cambria model do you think they are better.

03/06/2018 20:02:14

Okay, Seems like a decent model and value for money. Thank you for your comments.

Support Our Partners
electricwingman 2017
Subscribe now
Sussex Model Centre
Advertise With Us
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!