By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Adam Lomax

Here is a list of all the postings Adam Lomax has made in our forums. Click on a thread name to jump to the thread.

Thread: New EDF Mini Jets- Sabre & MiG15 RCM&E 2018 Special
27/07/2019 16:32:46

Tested mine a couple of days ago, flew really well with plenty of power on the FMS fan.

Just need to finish the canopy and air scoops now smiley

8c27e6a4-8148-46d7-8abe-9c9d72a706dd.jpeg

Thread: Can Doo it
27/01/2014 20:48:20

Can Doo

Test flew my Can Doo last weekend, really impressed with how it flies so far! It doesn't seem to have any nasty habits. 4-Max power set up gave enough power for decent verticals, although the motor came apart on its second flight and damaged the windings so not had much time to really get to grips with it.

A quick email to 4-max later and I was told that this was my fault and was the result of poor pre flight checks (which I know were carried out correctly) so currently looking elsewhere for a new motor before I can continue flying it.

Thumbs up to Nigel and RCM&E for a great design,

Adam

Thread: It's the grand pre-Xmas (better stuff than normal) giveaway!
20/12/2013 14:53:46

Count me in too!

Thread: Competition Flying
09/11/2013 19:08:19

I agree Peter, the GBR/CAA couldn't be more helpful in the F3A/F3P scene, every member is more than happy to help you out when you're stuck and give you feedback.

As for the cost I competed all the way up to FAI using a Black Horse Models Super Air and a Zen 120. Both of these models could compete against any two meter £3000 model... as long as the pilot pays attention and has set the plane up correctly!

Thread: A contra rotating brushless motor?
07/06/2011 22:26:44
Is this what your thinking of Simon?
Thread: Can you ID this model
07/05/2011 20:22:50
According to google it's a Airspeed Envoy  (posted at the same time as eck)

Edited By Adam Lomax on 07/05/2011 20:23:21

Edited By Adam Lomax on 07/05/2011 20:24:01

Thread: learning 3D
10/04/2011 22:33:29
although the EZ 3D is cheaper, i would say that the yak is definately better in terms of 3D performance. but this is only based on what ive seen (never flown either of them, but i have flown similar things)
 
cheers
 
adam
Thread: 40 sized aerobats
29/03/2011 18:02:03
probably the best F3A style plane of that size would be the kyosho oxalys or kyosho osmose. the osmose is more expensive but a bit better due to its larger side area. (this if from what ive been told)
 
ive got a phoenix model laser that flies excelently and will fly all of the current f3a schedules with ease and its a bit cheaper than the oxalys.
 
 
Thread: Phoenix Online Session
24/03/2011 22:00:22
session finished
24/03/2011 21:30:10
ive just set one up now
usual name and password
13/03/2011 21:35:52
i'm also done now, but the session is still in progress
thanks
Adam
13/03/2011 19:28:51
i'll, join in!
Thread: Model names
23/02/2011 11:33:11
most modern f3a planes have very wierd names now. Xigris and Axiome to name a few
Thread: 6D ?
27/12/2010 12:23:16
The guy flying it (Donatas Pazuolis) is from Lithuania, so im guessing somewhere there
26/12/2010 17:41:31
You are correct Jonathan, this is 5d.in a 6d model the motor would be able to pivot up and down as well (not just left and right). It is pretty amazing though

Edited By Adam Lomax on 26/12/2010 17:42:43

Thread: Wing Over
08/06/2010 20:10:31
during a stall turn the plane should pivot around the CG. A wing over happens when too much speed is carried through a stall turn meaning that the plane does not actuarlly 'stall' and flies through the manouver 

Edited By Adam Lomax on 08/06/2010 20:15:35

Edited By Adam Lomax on 08/06/2010 20:16:45

Thread: over-tec extra 260 55
09/05/2010 11:35:39
im looking to get one of these, but dont know what motor, speed controller and battery combination to put in it. Im looking for something less pricey than the overlander set up though. anyone got any ideas?
 
thanks
Adam
Thread: Probuild Galaxy electric f3a
19/04/2010 21:53:40
do you mean the infinity scott?
18/04/2010 20:30:59
hi colin
seeing as your going to start flying f3a you will probably find this fourm usefull (there is a section about the galaxy here)
 
adam
Thread: hobby king
19/03/2010 17:13:17
finaly got round to getting all of the heli built and the motor simon sent me fits great.
quick question what size ESC do i need
thanks
Adam
Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Sussex Model Centre
Wings & Wheels 2019
Slec
electricwingman 2017
Cambridge Gliding Club
CADMA
CML
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us