Here is a list of all the postings Tony Cooper has made in our forums. Click on a thread name to jump to the thread.
|Thread: Forum weekend prize draw - just like the good ol' days|
Donot just parallel up the two 5volt supplies as the esc and bec are most likely to interact with each other and not share the load. you should run two separate 5v busses with the 0volt's connected.
|Thread: Zulu E|
From what I remember the free plan is good. Its a nice model to fly.
|Thread: Canberra by Andy Blackburn PSS|
The Canberra T4 trainer had side by side seats for two pilots. It therefore had two direct vision windows in the canopy. In fact the picture at the start of this Forum shows the second DV window just above the door.
Edited By Tony Cooper on 11/03/2018 16:18:19
|Thread: Ask..Peter Miller|
Get yourself well again wrap up and keep warm. Then if sometime you come across them I would apreciate a copy.
Thanks Peter, I shall try and find the other parts
Peter , On the home page of the modelflying web site is the artical Headed by Building Technique
First line is
Peter Millers design school
Hi Peter, I was reading your "Learning your lines" artical, It reads to me that there was a previous part last month. I have been searching but cannot find it. any clues please on how to find it? Cheers.
|Thread: Nitro Engine Starter|
Cumaz , Yes please, I would be interested in your Sullivan mods. Have had mine 27 years or so.
|Thread: changing lipo connectors|
It may seem obvious to some but cut the wires from the centre of the wire. So as not to have the "step" on the outside of the wire.This leeds to a neater job and prevents wiskers forming to cause possible shorts in the future.
|Thread: Maricardo build|
One 1/4" or 6mm nylon bolt should be sufficient,
|Thread: Horizon Hobby (UK) Service or rather lack of it|
On monday I phoned HH about my DX6i's trim switches, This morning I received two in the post.
They just charged for the post & packing. Very efficient service.
|Thread: DX6i help required|
On my DX6i I broke the "roller" spigot, To prevent this I suggest pressing at the top of the roller, this is where the switch is.
|Thread: Hobby King Global Warehouse.|
My package from the global site arrived yesterday it only took 62 days.
|Thread: Problem with Irvine Z Bend Pliers|
I found this on UTube **LINK** and found it an easy way to make "Z" bends
|Thread: Depron 74" w/s Twin EDF "E.E. Canberra B2"|
I seem to remember that the dive brakes were fingers that came out of the top of the wing.
|Thread: Free Glue Grab Weekend|
yes please, Put my name in
|Thread: Renewing my Norton Internet Security|
If your ISP is BT and you have unlimited download you get McAfee for free.
|Thread: It's the grand pre-Xmas (better stuff than normal) giveaway!|
yes please include me.
try here just learning to inbed links
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!