By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Philf

Here is a list of all the postings Philf has made in our forums. Click on a thread name to jump to the thread.

Thread: VQ Kits
29/01/2011 19:40:49
Ive built three and got a forth on the go had no problems apart from the servo tray being loose on the Texan. But allways go round the joints with cyno.
 
P-51B Mustang Fly's like its on rails looks good in the air. OS 70FS
 
 
Cap 10 15cc RCGF Petrol, a bit challenging to fly as at certian attitudes orentation is a problem so needs flying.
AT6 Texan, Satio 72FS Hopefully will maden in the morning.
 
 
 
 
 
P-51B Mustang on the bench, OS 81FS being fitted.
 
For the price I have no complaints and I am planning to buy the 60 size FW-190A for a 15cc RCGF.

Edited By Philf on 29/01/2011 19:42:00

Thread: RCM&E 2010 Hobby Awards
03/12/2010 13:30:24
1. Slough models
 
2. Al's Hobbies
 
3. Seagull Edge
 
4. Horizon Hobbies
15/08/2010 20:10:02

1. Hobby Stores (Southampton)

 2. Pheonix model products (stan)

 3. Seagull edge 540

 4. Horizon hobbies
Thread: Wot Trainer
03/04/2010 20:04:12

Remove the control rods completely and replace with sullavan snakes, transforms the plane.>>

Thread: The Mode Survey - what do you fly?
07/01/2010 13:44:37
Mode 1
Hampshire
Hampshire
Instructer, 30 years ago! (seems like yesterday)
 
Thread: Ripmax WOT4 Mk2 ARTF chat
28/09/2009 12:46:29
70 4 stroke all the way.
Thread: When do you retire a model?
12/09/2009 21:16:08
Mine don't usually last long enough to retire
Thread: OS 70 FS Exhaust Port
10/09/2009 20:53:13
90 degree bend try Just Engines.
 
Phil
Thread: Horizon Hobby
07/07/2009 12:51:18
Alan,
they were both out of crashed models and I just wanted to know if they were ok.  Never found out why they crashed.
 
 There was no charge.
Phil
19/06/2009 21:13:39
Just like to say what an outstanding service Horizon give.  Posted two receivers at 10:00 Monday and received them back at 10:00 on Wednesday.
 
It's a shame more Retailers / Distributors were not like this.
 
12 out of 10 Horizon
 
Phil
Thread: Mixing Flaps
26/05/2009 19:14:02
Alan B saves the day  Within ten min's of printing Alans settings I had 2 flaps working together.  Big thanks Alan.
 
Phil
22/05/2009 20:17:17
Al, have e-mailed you thanx.
 
Doug, same type servos, two different pairs tried
 
Stephen, thats an understatment.
 
Phil.
21/05/2009 21:18:28
Alan B / Timbo
Sorry for the late reply spent the last two nights trying to sort this out still no joy  Two blokes two nights sad really init!
 
Can get both flaps working together but not the same amount of movement on both flaps, do radios bounce it's nearley gone out the window a couple of times
 
Alan,any chance you could send me the settings for the seven channel as I could swop one over.
 
Regards
Phil
 
Forgot to ask what does IYSWIM mean

 

Edited By Philf on 21/05/2009 21:23:37

19/05/2009 21:52:21
Managed to get full flap with the flap switch in pos 2 and nothing in pos1!!!
 
May have another go tomorow night.
19/05/2009 21:35:47
Ok thanks for that, maybe I need some lessons in computer radios.
 
Not very good with gadgets.
19/05/2009 19:56:08
Thanks for the replies.
 
Doug, will check.
 
Polyphilla, profile updated.  Must have forgot to save it last time
 
Timbo, will try this but there are no trims on the flap switch. 
 
Phil

Edited By Philf on 19/05/2009 19:56:42

18/05/2009 22:51:49
Help
 
Spent the last 3 hours trying to get flaps to work on a Black Horse Liberty 182.  Using a spektrum DX 7 with 6200 RX servos pluged into Flaps & Gear.  Using Mix 1.
 
Problem is:- No Flap setup ok, Full Flap setup ok, Half Flap they wont line up!!!
 
Can anyone shed any light on this as the instructions are no help, or is it my age.
 
Thanks in advance.
Regards Phil
Thread: Acrowot Build
09/01/2009 12:34:00
Do you not think that a 6oz tank is a tad small for a Saito 82?  Mine seems to drink fuel like its going out of fashion.
Thread: The November Grand Prize Draw
14/11/2008 17:45:00
Me please
Thread: The October Grand Prize Draw
03/10/2008 16:55:00
I'll take this one thanks.
Support Our Partners
electricwingman 2017
Slec
Sussex Model Centre
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!