By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for brfc7

Here is a list of all the postings brfc7 has made in our forums. Click on a thread name to jump to the thread.

Thread: PSS Models FOR SALE or WANTED
06/01/2016 14:18:13

I'm looking for a L E GUPPY if anyone has one yes

Baz

Thread: HK Me163
02/01/2016 18:15:11

Yes the c of g stated in Manuel is correct yes

Baz

Thread: Three Channel Stupid Question
19/12/2015 13:37:20

I'd definitely put the rudder on to the same stick as the elevator especially at this time of year then you can set the throttle to where you need it and then put your hand in the your pocket where its nice and warm ha.

Baz

Thread: BLYTH VALLEY RADIO MODEL CLUB
16/12/2015 23:20:18

Been again today at 9.30am. It was a little Foggy when I first arrived but it soon cleared up with broken clouds and a light breeze. I flew my Pushycat first just to get my eye in and then maidened my ME-163.

me-163 2.jpg

Lovely model especially as only cost £35 in the black Friday sale yes

Baz

Thread: Forum members' new models: Let's see them.
16/12/2015 23:16:28

Maidened today at Blyth Valley Radio Model Club in broken clouds and light winds at 9.30am

me-163 2.jpg

Flew 3 batteries getting 5 minute flights each. And my first impression is I love it, Especially as I got it on Black Friday through HobbyKing for £35 incl delivery smile p The model comes with all servos including one for dropping U/C, Motor and ESC.

baz

Thread: BLYTH VALLEY RADIO MODEL CLUB
13/12/2015 18:32:24

Managed to get to the field today for the first time in 6+ weeks. Their was about 10 members their when I first arrived at 2pm. I only managed 2 flights with my 450 heli as my fingers couldn't cope ha. Will maiden my me163 another day. I was still their until gone 4 and dark as got gassing as usual more talking than flying. 

Baz

Edited By brfc7 on 13/12/2015 18:33:47

Thread: Build of a Nigel Hawes Fizza
07/12/2015 19:59:55

Hi Percy, jobs done. The motor I'm using comes with a mount so I used that to mark my ply. I drilled one hole and attached motor mount and then drilled the remaining three.

Baz

07/12/2015 16:37:34
Posted by Redex on 07/12/2015 16:32:51:

Hi brfc7,

I think one of the options for the Fizza was to build on an undercarriage and some small wheels - are you adding wheels or keeping as is.

Many Thanks

Wow someone out their is read this yes

No undercarriage been fitted Redex, Don't see the point on such a small plane when flying off a grass runway. I would possibly consider it if I had the use of a tarmac one, just for touch and goes.

baz

06/12/2015 18:42:39

Been busy again today smiley Cut the hole in rear of fuz for elevator servo and glued in a couple of pieces of ply on the inside to screw in to. Also cut two holes right through the wing for the aileron servos. I've used some thin card on the top of wing to cover hole so won't see it once covered. I'll glue the servos in once covered.

12

Next pic shows servos installed and wires are well accessible for plugging in to rx. This was after I'd glued the wing and tail on yes

13

And finished off with some covering. Only the wings top and bottom to do and the 3 control surfaces

14

Baz

05/12/2015 20:53:06

Tail all squared up and then had a dry fit.

11.jpg

baz

03/12/2015 21:47:21

Tailplane near enough finished except a little finish sanding

8

Battery hatch which I made a little shorter than plan as I don't need access behind F1 as their isn't any servos in their. Ply plate holding the front and magnets holding the rear.

9

Motor mount glued on and since i've now received the canopy i made a start at shaping the whole fuz

10

baz

Thread: HK Me163
30/11/2015 14:52:28

Arrived this morning yes Not a lot to do to get her airborne.

Definatly a total steal at that price as the pre installed gear would cost more than that.

baz

27/11/2015 08:27:48

Bought one this morning yes £35 delivered and it includes motor, esc, 3 servos, 2 props and is nearenough ready to fly.

baz

Thread: Build of a Nigel Hawes Fizza
27/11/2015 07:47:18

Profiled wings and planed ailerons and elevator to allow movement last night yes

Waiting on the canopy arriving really now then can use that to get the correct shape of front cowl.

Also servos , motor and esc arrived so I will start installing them. I've went for the same motor as I use in my Pushycat a Turnigy 2836 1100kv spinning a Apc E 8x6 on 3s 2200mAh. This setup gives 180w @ 18 Amps and 8 minute flight times.

baz

23/11/2015 18:03:08

As above I take the time to make sure the first hole is in exactly the right place using the supplied motors cross mount and then bolt the cross mount on to the ply motor mount and drill through the other 3 holes = spot on everytime yes

Baz

Thread: CNC cut ply motor mount needed
23/11/2015 16:27:49

Well I took the plunge and made my own motor mount today. I'm more than happy with it yes

Went to Wilkinsons and bought a compass for £1 and used that against the plan to get the correct size then marked that on to the 3mm ply. I used my saw to get as close to the line as I could and then used sandpaper on it while slightly turning it.

7

Baz

Edited By brfc7 on 23/11/2015 16:28:13

Thread: Build of a Nigel Hawes Fizza
23/11/2015 16:22:59

Took the plunge and made my own motor mount today. I'm more than happy with it yes

Went to Wilkinsons and bought a compass for £1 and used that against the plan to get correct size then marked that on to 3mm ply. I used my saw to get as close to the line as I could and then used sandpaper on it while slightly turning it.

7

Baz

Thread: CNC cut ply motor mount needed
23/11/2015 08:43:42
Posted by Masher on 23/11/2015 07:41:23:

Baz - pm me your address and I'll make you one (not CNC)

Cheers for the offer Masher, Think I will try and do one myself. I'll get in the cupboards later and see if any of our glasses are the right size yes and if not I'll nip to shop and get a compass.

Thanks for the replys.

Baz

22/11/2015 23:23:33

As title, can anyone make me a circular motor mount approx 47mm across? In 3mm ply with just a centre hole of about 6mm then I could drill holes for actual motor. This is needed for my current winter project of a Nigel Hawes Fizza.

Baz

Thread: Build of a Nigel Hawes Fizza
22/11/2015 19:27:19
Posted by Andrew767 on 22/11/2015 19:02:28:

Cheers Baz......and thank you...btw what did you pay?

Andrew

No bother, £8 incl p&p

Glued all the bits together that make the front cowl, ready for shaping when I can sort out a decent motor mount yes

6

Baz

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Support Our Partners
Addlestone Models
Wings & Wheels 2019
electricwingman 2017
Slec
CML
Cambridge Gliding Club
Gliders Distribution
Pepe Aircraft
Sarik
Advertise With Us
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us