By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for J V R

Here is a list of all the postings J V R has made in our forums. Click on a thread name to jump to the thread.

Thread: Help me find a shed!
06/04/2012 00:17:43

Hi Be, go for a shed with high leval windows, they are a lot safer as no one can look in, or remove the glass to gain entry. Also less heat loss during the winter.

http://www.theshedfactory.co.uk/section/11/1/security_sheds

Edited By J V R on 06/04/2012 00:19:03

Thread: How many engines have you got?
20/03/2012 23:23:38

Not enough by looking at those list's above frownfrown

Edited By J V R on 20/03/2012 23:24:11

Thread: prop size chart for IC engines
19/03/2012 21:04:37

Hi Steve

It's for the OS 25 that's in the TN Miget Mustang. It's been sitting on the bench waiting

for some decent flying weather.

17/03/2012 14:09:05

Thanks ED just what I needed

17/03/2012 13:49:11

Is there a prop size chart for ic engines on this site?? I need a prop for an OS 25 . I thought I had seen one but not had any luck with the search function

Thread: Locking threads
15/01/2012 22:01:25
I think you need stud lock which stops bolts coming undone as opppsed to locktite which
locks threads solid..........
Thread: It's "is it time to move on to 2.4"
17/11/2011 20:07:53
I'll second what Engine dotor says about the Frsky set up & 4 & 8 channel RX under £20

Thread: Tony Nijhuis Racing Duo
15/11/2011 19:06:48
Hi steve,
 
I have just checked the CoG as it stands with out any covering minius the spinner ( just the back plate ) and it looks like I will have a problem, and I still have the engine cowlings to fit. Hopefully there will be enough room to fit the battery behind the servo's up against the rear bulkhead behind the wing............
12/11/2011 12:29:33
A couple of pictures of my work done on the M M
 





Thread: Oilly mess
15/10/2011 01:51:49
So after a couple of years flying electric models I have moved on to IC planes, whats the best way to clean the oilly mess off the plane after a days flying??
Thread: Running in os 40fs
17/07/2011 14:25:51
Hi B C
 
Funny you should say about the plugs with the idle bar I found a strip of 8 that I've had from 30 years ago when I stopped flying & was wondering if they were allright to use on a modern engine........
 
JVR
Thread: General hobby
15/07/2011 00:30:57
Hi DF
 
I've searched the forum & found some posts on the bobcat which is very similar, on one thread they talked about adding extra length to the front leg to aid take off....
Thread: Running in os 40fs
14/07/2011 20:53:08
I have got an os 40 fs, would it be ok to run this engine on the same fuel that I use for a 2 stroke, the fuel that I have is Model Technics big bang 16, as the lable states. Also this is a new engine that needs running in so is it the same as breaking in a 2 stroke IE run rich & short runs before it gets to hot, not letting it rev to high for the first few runs ect ect..........
Thread: General hobby
14/07/2011 16:06:48
Some how I have got on their mail list (General hobby )& recive e-mails nearly every week. Looking through the sale list, I like the look of the Flycat 90 pusher jet here, has anybody got one, what are they like to fly. Looking at the video's they seam to twitch a bit when slowing down for a landing or is it just cross winds...

Edited By J V R on 14/07/2011 16:08:17

Thread: Twinstar motors
27/06/2011 23:21:59
Twinstar pics again ( others posted in another thread oop's )
sorry double post, please remove..
 



 









Edited By J V R on 27/06/2011 23:22:54

Edited By J V R on 28/06/2011 00:34:24

27/06/2011 23:21:56
Twinstar pics again ( others posted in another thread )
 


 





Thread: Today
27/06/2011 23:01:23
A few pics of the Twinstar
 
 




 
 
 
 
Thread: Twinstar motors
26/06/2011 23:54:35
I was flying 11mins on a LM 3000 3s with mixed throttle use from floating around with steep climb outs & touch and go's, the motors were cool & no heat from the lipo or esc's which are mounted in the slots behind the motors where the wires from the stock cans would go. I will post some pictures on monday eve.........
Thread: Today
26/06/2011 11:07:59
Up at 0645, round to the local park flying the twin star before it gets to hot. Just myself & a few dog walkers out.......
Thread: Plane for an OS 40 4s
07/06/2011 13:43:55
Eric
Do you know what the average weight of a 25 or 32 two stroke would be ??
Latest Forum Posts
Support Our Partners
Sussex Model Centre
CML
electricwingman 2017
Slec
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!