By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for J V R

Here is a list of all the postings J V R has made in our forums. Click on a thread name to jump to the thread.

Thread: MAK 15 MP
20/06/2018 11:22:20

I'll be watching this one Peter...... I do like the unusual

Thread: Help need charging a 12V PB battery
11/04/2018 23:00:35

Rocker you may have a faulty cell that is causing the over charge, I had a similar problem on a 24 volt Land rover due to a bad cell the total charge went up to around 30 volts

Thread: The 2018 Transmitter Survey!
09/04/2018 18:08:53

Still FrSky, no change from last year for me

Thread: Messing about with Mercos'
14/02/2018 18:17:18

Jeff2wings PM sent

Thread: Lidl Sander
08/02/2018 14:10:50

Got mine there were only 5 left in the Eltham branch, just checked it works and for any run out on the sanding disc and it runs nicely with no vibrations.......

Thread: Is it a scam trying to get my Hobbyking details?
22/10/2017 01:44:04

Just checked my spam box and its the same for me...

Edited By J V R on 22/10/2017 01:44:25

Thread: Phone Volume
18/10/2017 23:22:47

David

try **LINK**

leave your pc volume to what you normally use and just search and test until you find a louder ring tone, have a listen to some of the boat horns or the siren tones they always seam to be loud.......

Thread: V8FR
05/10/2017 12:33:01

Thanks PatMc.......

05/10/2017 12:11:36

I have lent a flying buddy a spare Futaba TX with a Frsky module and an old Frsky receiver V8FR, he asked me the other day if its ok to use a 5 cell receiver pack on it I asked him if it has a HV sticker on the side but he wasn't sure if it has and I cannot remember..

_20171005_114356.jpg

Thread: What build blogs do Forumites want to see?
11/02/2017 00:07:55

Mannyroad, I like simple easy builds along with more complex builds. I'll be watching........

Thread: Forum members' new models: Let's see them.
26/10/2016 22:52:15

Here's my new model just finished but not had a proper flight yet as the engine is new and not run in enough to give a reliable run

It's a Bright Spark that has been altered a bit to fit the asp twin and has a 2 peace main wing 88'', also other than the leading and trailing wing edges the rest of the plane has been made with light ply, and birch ply for the engine former and undercarrage mounting.

dsc_0312.jpg

dsc_0258.jpg

dsc_0256.jpg

Thread: Magazines gone under
29/09/2016 15:33:58

JC pictures speak a thousand words wink wink

Thread: New here & question about mounting IC engines
28/09/2016 00:06:50

I'm with Mike T, self tappers up to a 40 size sc engine, above that I use bolts with locking nuts

Thread: Step craft CNC machine
31/08/2016 23:44:42

Hi Onetenor

My cnc machine will cut faster and deeper but I chose not to run it at its max, plus I'm new to this cnc game and just getting to grips with cutting depth V speed. I did make a mistake when I was machining the spoil board and plunged a 15mm cutter 3/8 in to the mdf board and cut a channel across the spoil boarddsc_0218.jpg

Thread: Verhees Delta
12/07/2016 10:18:10

Max Z

I like it and I would like to see both sets of plans and then decide which to use, fingers crossed and waiting.

Thread: Sandbox
02/07/2016 18:51:37

 

test link Removed

Edited By J V R on 02/07/2016 18:52:12

Thread: sc 46 cuts at half throttle
14/06/2016 12:53:15

Hi Andrew

I striped one thread on the carb of my SC 40, asked at the LMS and was told to just put a bolt through with a nut on the other end and that it will have little or no effect on performance, this was done and I sealed the carb with silicon around the ''O'' ring and the bolt and never looked back....

Thread: And You Think You Sometimes Work Hard On The Sticks
31/03/2016 23:32:46

She's certainly rough with the controls

Thread: Drone racing
24/02/2016 20:48:25

I've no interest in quad's or drones but I thought some on here would like it, I did notice most if not all pilots were using the Tanaris though.


24/02/2016 18:37:02

No words just a link

**LINK**

Edited By J V R on 24/02/2016 18:37:42

Support Our Partners
electricwingman 2017
Slec
Subscribe now
Sussex Model Centre
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!