By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for J V R

Here is a list of all the postings J V R has made in our forums. Click on a thread name to jump to the thread.

Thread: Step craft CNC machine
10/02/2016 11:29:22

Herri- I have a 19mm board on mine, I do find lite ply hard to keep flat so there are a couple of screws to stop the ply shifting around the base board then strips of double sided tape work well. When the base board gets carved up mix some sawdust with PVA and fill the cuts then machine the base board flat again.

10/02/2016 10:59:10

Airpaddler- the DOC is set to the thickness of the wood being cut, thin ply could do with some double sided tape to keep it firm as it tends to flex as the cutter goes through.

10/02/2016 01:57:16

Hi Shane,

I've just put a couple of videos up in the sandbox of my cnc machine, here's the last one that I did cutting 6mm birch ply dihedral brace using Cut2D to draw it and make the G-code for the cnc machine, I cannot get to grips with any cad programs yet and just use the Vetric Cut2D to make my drawings and generate the G code for the cnc. My cnc is run using an Xpro board and GRBL panel or UGS which are quite easy to use but have less features than Mach 3 and give results that I'm happy with.

Edited By J V R on 10/02/2016 02:00:43

Thread: Sandbox
10/02/2016 01:30:37

and again

10/02/2016 01:16:52

Testing again

Thread: Weekend Giveaway
09/02/2016 23:37:16

Yes please.....count me in

Thread: Sandbox
09/02/2016 00:24:22

Second test

 

Edited By J V R on 09/02/2016 00:24:53

Edited By J V R on 09/02/2016 00:25:41

08/02/2016 23:44:44
test
 
 

 

Edited By J V R on 08/02/2016 23:46:32

Edited By J V R on 08/02/2016 23:59:42

Edited By J V R on 09/02/2016 00:09:19

Edited By J V R on 09/02/2016 00:10:43

Edited By J V R on 09/02/2016 00:11:14

Thread: 2016 RCM&E Autumn Special- Free Plan Modellers Choice
12/01/2016 23:32:52

I can think of two I would l like

1. Cessna 337

2. Zero around 60'' wing span

I will need to think about the third one

 

Edited By J V R on 13/01/2016 00:02:58

Thread: Tow Tug - first CAD/CNC Project
11/01/2016 02:58:21

I've just finished building a cnc router from a kit so I will be looking closely at this thread

well done Herri...

Thread: Any broadband wizards around?
02/09/2015 16:38:39

Just done the speed test, 156.43 mbps down & 11.4 up we are on virgin BB and around 4 mls from bromley where it comes from.

Thread: A Chicken And Egg Question
28/08/2015 12:06:45

I do both, I've just bought one of the ASP160 twins & now looking for a model to put it in, whilst I'm building the TN hawk (funfighter size) for a spare SC25 engine........

Edited By J V R on 28/08/2015 12:07:31

Thread: Baby Flea
08/08/2015 11:58:38

Hello Maz Z

Looking at those computer generated pictures made me think of the asp 160 flat twin that is calling out for this style of aircraft for it to be fitted into, would it be feasible to scale it up for that size of engine what sort of size would it end up at, or just stick with a 91 fs if the 160 twin is to big.

07/08/2015 11:11:20

MZ, that looks interesting I'm very fond of some of the old home built designs. What sort of power plant are you thinking of using. Keep the updates coming I'll be watching this one.

Thread: Home needed for a ASP160
31/07/2015 23:13:16

Hi Bob,

It would be nice to see the cylinders, not seen the Mustfire?

31/07/2015 23:01:41

I've got a ASP160 engine that needs an airframe, I know a piper cub would suit this engine but I was wondering what else is out there to put it into, plus I already have two cub's. Another possibility might be the astro hog from slec. Any ideas??

Thread: club politics
12/07/2015 22:53:31

Its not just this hobby that has problems with rules and politics, I own a couple of ex military land rovers that I attend shows with and will be away at the largest military show next week ( Folkstone ), I used to belong to a club that was 99% ex military landrovers, every thing was running fine with some rules that every large club needs to have then some places went up for re election on the committee. A few people got elected and started making changes, and made it their club at this point myself and 5 other members walked and formed our own group not a club, we all run it and say what we want and run it the way we want, no one in charge and we all muck in, we even allow a couple of guy's from the ''other'' club to come and display with us. We only have one rule and that is '' you are an adult act like one '' which I think covers everything including safety as there is always Beer flowing of an evening.

12/07/2015 13:27:15

I belong to 2 clubs one is large 150 members the other has 18, large club has lots of rules, small club has one basic rule, be sensible...........

Thread: Throttle arm
10/05/2015 23:36:54

Iqon,

there is around 10mm difference between the center of the push rod and throttle arm its not very clear in the pics it was hard to get the right camera angle.

PO

I like the idear of the u-bend so simple............

10/05/2015 23:02:49

I need to extend a throttle arm by about 10mm to line up with better with the servo, I can not think how to do this. Dose anyone have any easy to do mod that will put the arm more in line with the servo and do away with the crank in the throttle linkage (see attached pics)

.dsc_0017.jpg

dsc_0018.jpg

jvr...........

Latest Forum Posts
Support Our Partners
electricwingman 2017
CML
Slec
Sussex Model Centre
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!