Here is a list of all the postings Dave Potter has made in our forums. Click on a thread name to jump to the thread.
|Thread: Lipo charging|
Hi Guys. When charging my 2.2 lipo Batteries on my charger they charge to 0.0A on my charger but the charger never reaches full. when I checked them on my tester it gives me a reading of 12.56V and 98.56 % is this ok to fly?
|Thread: Prop size|
Hi guys, Thanks for all the advice I have received from you all. It's all been a great help. I have now brought myself a wattmeter.
Sorry guys it's a uno wat. what a plonker I am.
Hi Denis. It's a wots wot i had given to me for my grandson to learn to fly. I have converted it to electric. I wil be using 4cel lipo battery and the all up weight will be about 5lbs Thanks Denis.
Edited By Dave Potter on 21/02/2018 16:26:11
Hi Guys. I have brought a new Turnigy motor SK3 4240 740 and I can't find any prop sizes can anyone help ?
|Thread: Covering iron|
Hi Guys. Anyone know where I can find a smaller covering iron for getting in those little tight corners. I have triied most model shops without any success.
Thanks for any input....
|Thread: Electric motor for WOT4|
Hi Folks, Can someone recommend a cheapish motor with a bit of power for a balsa wood wot 4 3 or 4 cell ?
|Thread: UNO WOT|
Thanks guys for the information. I think i'll be going up your route Dave W. I already have the motor EMax G2820/07 850w. Sorry guys the first message i sent back is wrong.
Edited By Dave Potter on 02/12/2017 11:24:37
Thanks guys for the information. I think i'll be going up your route Dave W. I already have the motor EMax GT42829/07 850w.
Edited By Dave Potter on 02/12/2017 11:23:17
I have been given a old UNO WOT and I want to convert it to electric. What would be your best set up to use? I need something with a little power.Three sell or four.
|Thread: Covering over filler|
Hi Guys. I have just finished rubbing down filler on a glassed wing bandage. Do I have to do anything else apart from dusting it off before covering with pro film? I've covered over filler before and it hasn't stuck down to well.
Hi Friends, Thanks for the information you have given me. I have now sent a email to Mr Reeves hoping he can help me.
PS don't know what i would do without this site. So many helpful people...
Hi Guys, Does anyone out there have the manual for a Gangster 63. It's the old one with foam wings. I will pay for it plus postage.
|Thread: Painting on Solatex|
I guys, I have just finished building myself a electric Junior 60. I have covered it with Solatex and given it two coats of cellulose dope to fill in the weave, to keep the dirt out. Now I need to do some brush painting on the wings, can anyone tell me what paint to use….
Thanks for any help you can give me….
|Thread: Lengthening Wires|
Thanks guys, some very interesting answers. I am just going to solder the 3 inches on and see how it goes.
Hi Folks, will it be ok to lengthen the wires on my speed controller by about 3 inches ? it's the 2 that go to the lipo.
|Thread: What makes you nervous?|
I like it when it's raining then i can't fly lol
|Thread: Junior 60 electric|
HiFriends, Thanks for all your input. My set up is the same as gangsters. You can get any information from BRC Hobbies on 0191 488 7879 They are so helpful.
I will post some pic when it's finished. Thanks guys…..
Hi friends, is there anyone out there that can send me pictures of the front of a Electric Junior 60. I just need to see how the battery box Has been finished off. I have one but it's to dark to see. It's the Ben Buckle kit. Thanks .....
|Thread: Junior 60|
Hi Gangster. Thanks for the photo and all the information you have given me. I will be going down your road with the Battery Box. one more question mate what motor and battery should i use.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!