By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for bert baker

Here is a list of all the postings bert baker has made in our forums. Click on a thread name to jump to the thread.

Thread: 2020 BMFA power nationals
05/01/2020 08:28:07

Andy from BMFA has told me it’s the Bank Holiday weekend so must be 29-31 August

03/01/2020 18:21:28

Just starting to plan my holidays

Does anyone Know if the BMFA power nationals dates have been confirmed

I know it's normally around the Aug bank holiday but would like to confirm the actual date

Cheers

Bert

Thread: TJD Models
13/12/2019 17:33:48

It’s a popular shop,,and staff are normally rushed of their feet,

Thread: Precedent Stampe 1/4 Scale
11/12/2019 21:33:31

Eventually it’s all going to go wonky and you’ll have so much fun flying it you won’t care

11/12/2019 19:30:45

I’ve fitted top and bottom wings and set the cabaines when happy with their alignment fitted bracing into position

11/12/2019 18:12:17

Laser 180 are currently in stock it would be a good choice,,, but you will need to get your skates on if you want one

11/12/2019 17:47:46

svenson size.jpg

11/12/2019 17:46:09

That is a Svenson Stampe,,, the other diferance is the cowl had a removable front section

11/12/2019 17:44:48

p6290031.jpg

11/12/2019 17:42:15

Hi Adrian,

The Svenson Stampe has a one piece bottom wing, the top wing has a centre section fixed to the cabaines and has two wing panels that plug in to it. And it ushally has a enclosed canopy that spreads across both front and rear cockpits

The Precedent Stampe has one piece wings top and bottom and can be in single or double open cockpits

Im not that familiar with the power output of the Satio, but It will prop be ok as the Stampe’s seem quite happy on a broad range of engine choice

Thread: BMFA News Dec 2019
09/12/2019 14:47:24
Posted by Paul C. on 09/12/2019 09:29:54:

Haven't had my mag yet 😢 , hope I am not off Santa's list 😨

Fear not,,,, your not the only one still on his list of hopefuls .

in time it will turn up, they have been rather busy lately.

Thread: BMFA Renewal Certificate
07/12/2019 09:12:06

Paid mine directly to Bmfa Using the online portal.

recived a confirmation of purchase email

at bottom of email was attached the printable membership document

open the attachment and print it off

Thread: what type of battery pack for i/c engine trainer
02/12/2019 07:06:17

And the most important bit will be the correct type of battery checker.

Don’t use a lipo tester

Get a dedicated Nimh tester one that will load test the battery pack

I favour the Fusion one

Thread: Foam Wing Cutter
27/11/2019 09:55:02

Contact adhesive on both bits,,,, leave the laminate on the bench and roll the foam onto it and use the offcuts of the blank to support if required.

a alternative was years ago to use paper...

think the Mick Reeves Disco fun plane was paper covered

Thread: A new caption competition - winner declared!
27/11/2019 09:42:24

It’s not my fault I hit you.,, height restrictions do apply.

perhaps you could crawl past on hand and knees next time you want to take your dog for a walk

Edited By bert baker on 27/11/2019 09:43:46

Thread: Foam Wing Cutter
23/11/2019 19:53:42

I’ve been told the iron on kitchen worktop edging is good,,,

But I rather fancy the newer stuff is probably not as hardy as it used to be

Thread: Precedent Stampe 1/4 Scale
23/11/2019 19:50:14

I’ve been offered some stuff a bit like Diatex 1000

23/11/2019 19:19:35

I am now thinking what is the lightest tex type covering,

standard tex ,, poss dope and some form of tex

Thread: Best way to hinge control surfaces
23/11/2019 18:54:58

I’ve been using Blendum tape on some smaller sheet depron models

haven’t had any issues.

May or may be not suitable for your application

Thread: Precedent Stampe 1/4 Scale
23/11/2019 18:49:53

Good idea Nick I’ve seen the LMA boys do it with piano wire.

but can’t say ive ever had any issues.

My next one I will be looking to make it as light as I can.

I really would like to get one under 7kg

That will be a challenge for me as I don’t build light

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
CADMA
Slec
Cambridge Gliding Club
CML
Sussex Model Centre
Wings & Wheels 2019
electricwingman 2017
Advertise With Us
Sarik
Do you use a throttle kill switch?
Q: This refers to electric-powered models but do you use a throttle kill switch?

 Yes
 No
 Sometimes
 Rarely

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us