By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for bert baker

Here is a list of all the postings bert baker has made in our forums. Click on a thread name to jump to the thread.

Thread: Precedent Stampe 1/4 Scale
17/11/2019 16:10:13

Awww shucks,,,

Go on then Cymaz

How do you know

Thread: The Gov't, CAA, BMFA & UAV legislation thread
15/11/2019 15:46:39
Posted by MattyB on 15/11/2019 15:24:47:

Looks like the buddy box question has been answered in our favour - from Andy Symons on FB...

"Productive CAA meeting yesterday. No exemption required for buddy box flights. The CAA fully accept the BMFA position that the person holding the slave TX is neither the operator or remote pilot.

Of course the aircraft will need a valid Op Id on it and the person on the master TX must hold a competency."

Cool,,, I pleased with that,,, but I couldn’t find it on face book

15/11/2019 15:38:35

It’s not that bad

Thread: Laser Engines - Technical questions
15/11/2019 15:24:00
Posted by John Stainforth on 15/11/2019 06:54:49:

Don,

Is it really such a good idea to hang a weight on a crankshaft? I would be interested in Jon's opinion.

The boat brigade, car and helicopter fans have done it for many years,

Thread: Avicraft Panic
10/11/2019 10:36:35
Posted by J D 8 on 10/11/2019 10:22:53:

rNot had one myself but a friend did and used to manoeuvre it had to get the interplane struts to pop off ! laugh They were only fixed on with clothes fasteners.

Edited By J D 8 on 10/11/2019 10:23:15

Yes that's the point, Press studs to hold the and plates on,

Cartwheel it down the runway ,

refit  the wings back onto their seats refit the end plates and go fly again.

 

No glue needed for the average misshap

Edited By bert baker on 10/11/2019 10:38:21

Thread: The Gov't, CAA, BMFA & UAV legislation thread
09/11/2019 10:21:51

Hat and coat at the ready for the naughty step

09/11/2019 10:21:14

 

What if someone who knows you, goes rogue and uses your details on the INSIDE of their drone to commit a crime ? it's a jungle out there, can't be too careful you know. wink

Hmm perhaps I should take the number plates off my car

Edited By bert baker on 09/11/2019 10:22:14

Thread: Precedent Stampe 1/4 Scale
08/11/2019 20:40:01

Knickers ,, did you not have blue peter

08/11/2019 19:25:03

I suppose you could fit the supplied undercart and trim off to form a stub for the oleos

08/11/2019 19:22:34
Posted by Jon - Laser Engines on 08/11/2019 18:50:59:

Its pretty easy to make an undercarriage. I made mine from a pair of cheap hobbyking oleos and a few lengths of strip steel. A bit of brass tube, a few bolts and some silver solder later and it was all done.

While a spung u/c might not be 100% required i have found it really makes a difference to the model as takeoff and landing look so much better with the wheels bouncing around and the model rock solid

And a pair of Valerie singletons

08/11/2019 18:00:57

You may find gas struts will need to be restricted

I would favor the flair sprung Tiger Moth type

Thread: How many flyable aircraft do you have ?
06/11/2019 10:21:44

I counted two.. but then maths has never been my strongest subject

Thread: Covering a sheeted surface in tissue and dope.
06/11/2019 08:20:05

I would have a practice on a scrap piece of balsa,

Its quite easy to put to much dope on and can start to ballon up

Thread: I know what it is but do you ?
03/11/2019 11:29:50

Is this the state of a new game,,

It’s a bit like the old tv program Out of town with Jack Hargreaves

03/11/2019 09:35:12

I had a Enya 40 open rocker for years,,,, came to me gumed up beyond use from caster abuse

It cleaned up nice after a long soak in tub of glow fuel,

Runs superb

now destined for a old school Ben Buckle plane

thinkig of the retro weekend

02/11/2019 20:21:15

LOL

02/11/2019 19:16:43

247ecd65-8a2d-46ed-a885-66ec4a2fa4f6.jpeg

02/11/2019 19:08:50

The Magnum looks to be missing the pinch bolt for the carb and exhaust tubes

02/11/2019 18:06:31

Engine looks very much like a Enya open rocker

be interesting to know the prop size

Thread: Stampe SR7 building blog
31/10/2019 19:53:37

Good looking plane

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
CML
Sussex Model Centre
CADMA
Wings & Wheels 2019
electricwingman 2017
Slec
Cambridge Gliding Club
Sarik
Advertise With Us
Do you use a throttle kill switch?
Q: This refers to electric-powered models but do you use a throttle kill switch?

 Yes
 No
 Sometimes
 Rarely

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us