By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for John Keywood

Here is a list of all the postings John Keywood has made in our forums. Click on a thread name to jump to the thread.

Thread: Flair se5a help needed.
22/11/2017 09:31:32

Hi 'Vintage', if you still need the instructions, I have some and can sort them out this weekend.

John

Thread: 2018 Mass Build - Voting Thread
08/11/2017 07:14:13
  • 1) Ghost Rider
  • 2) Super 60
  • 3) Cub

Thread: Micro Aces Bristol F.2b
24/10/2017 07:43:55

Good work. Watching with interest.

Thread: Chris's Super 60 Build
01/07/2017 17:50:21

Hi Chris, watching with interest. I like an 'old time' build.

Thread: Open Pilot CC3D
21/01/2016 19:19:24

Thank you Dick,

I looked through that forum and the sugestion is that the drivers do not work properly with Windows 7. My computer is running on Windows 7. I am going to upgrade to Windows 10 and try again.

John

21/01/2016 09:52:58

Can any one help?

I have a Night Hawk 250 with an Open Pilot CC3d Evo Flight controller.

I have downloaded the software to my computer but every time I try to open the download on my computer a message comes up ' Openpilotgcs exe has stopped working'.

As far as I am aware the computer says it has downloaded correctly but it will not run. Has any one any idea what I may be doing wrong.

Thread: Ben Buckle Fokker DVIII electric conversion
03/01/2016 09:54:14

Looks great. Well done

Thread: prop reamer?
12/06/2015 08:17:53

Thank you both. I have purchased one today.

11/06/2015 20:29:30

Can anyone tell me where I can buy a steped reamer to open up the hole in my propellers please? If I drill the hole it always comes out off centre.

Thanks,

Thread: spektrum Dx6i problem?/ servo movement
17/02/2015 13:23:35

Hi again, I have checked my transmitter again and tried another model memory and the travel on the servo and the monitor screen is normal. I have cleared the memory on the channel I was using and it is now all back to normal.

Thanks again to every one for the advice.

John

12/02/2015 19:42:00

Thank you all for your replies. I cannot check at my transmitter for a few days so I will look at it on Monday and let you know what I find.

John

12/02/2015 08:42:45

Can any one help?. I have a Spektrum Dx6i which has given good service in the past but now is showing a strange problem. For example, when I move the rudder stick it gives more movement at the servo to the left than to the right. I have tried to compensate with the adjustments in the transmitter but nothing changes. I have tried another receiver and another servo and it is the same. I have tried another transmitter and the servo moves equally both ways. Have I done something to the settings on my transmitter or is it time to get it checked out by the manufacturer?

Thanks,

John

Thread: STOL-X(perimental)
29/01/2015 20:22:28

Realy good blog. Inspired me to get on with mine.

Well done.

John

Thread: P.R. STOL Mk1/11
07/01/2015 16:41:17

Thanks for the advice Martyn K, I will be watching your blog.

It looks as if I will be using Litespan then. Thanks everyone for the advice.

John Keywood

04/01/2015 10:29:04

2015-01-03 12.24.42.jpg2015-01-03 12.24.32.jpg2015-01-03 12.23.36.jpg2015-01-03 12.23.07.jpg

04/01/2015 10:27:01

Hi everyone, I feel I have had a head start on my build as I started before the STOL was nominated. I am building as the plan but it will be powered by an electric motor. I am starting with the Mk1 three channel configuration and then adding the Mk 11 wing at a later date. I do have a Mk 1 plan from the early days and the Mk 11 plan. I have found some discrepancies on the plans but they are not too much to sort out. (some formers are drawn the wrong size etc.,) I intend to fly the Mk 1 as a three channel and then adding the Mk 11 wing and flying with ailerons. I am intending to cover my model with dope and tissue but does anyone know if the more modern coverings would be as good

Good luck to every one building,

John Keywood

Thread: 2015 Mass Build - Sign up thread
20/11/2014 11:38:21
I am in, and intend to build the STOL 11 converted to electric.
John
Thread: 2015 Mass Build - 1st stage Model List
17/11/2014 19:35:36

Well done Martyn.

I will be building the STOL Mk 11. I have already got the plan and CNC wood pack.

I must warn every one the CNC pack I received was OK on the Mk 11 wing ribs, but the parts for the fuselage were all wrong. Unfortunately My Hobby Store were not able to help me when I brought the matter to their attention. I think it will be better for people to cut their own parts but do not take for granted that the shaped parts on the plans are 100% correct.

John

Thread: 1st Round Voting Thread
10/10/2014 08:44:56

1. Peter Russell Stol

2. Wot 4

Thread: Heip for another ID please
23/04/2014 18:27:16

Thanks every one, I have googled Top Flight Contender and apart from the dihedral in the wings it does look like the pictures. I assume the dihedral was to help novice flyers.

I will go with what I have and get this one up in the air soon.

Thanks again,

John

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Pepe Aircraft
Slec
Wings & Wheels 2019
electricwingman 2017
Cambridge Gliding Club
Gliders Distribution
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
Do you use a throttle kill switch?
Q: This refers to electric-powered models but do you use a throttle kill switch?

 Yes
 No
 Sometimes
 Rarely

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us