By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Hogster

Here is a list of all the postings Hogster has made in our forums. Click on a thread name to jump to the thread.

Thread: Ideas for new polls
14/02/2015 14:46:05

I'm not sure if this has been suggested or done before, but how about a poll on common causes of crashes? Might be helpful for beginners. My limited experience has noticed the following are common causes, but not common occurrences, wink at my club.

1) Tip stall on take off

2) Tip stall on landing

3) Mechanical failure

4) Electrical failure

5) Disorientation

6) Misjudgement with an aerobatic manoeuvre

I know it is not always clear why a model transforms back into it's component parts, but a best guess is all that's needed.

Thread: Guy Martins Spitfire Channel 4 tonight 7.30pm
12/10/2014 16:23:54

Just a heads up in case you didn't know about this documentary that's on tonight. I believe this is about the Mk1 spitfire based at duxford.

http://www.channel4.com/programmes/guy-martins-spitfire

Edited By Hogster on 12/10/2014 16:27:47

Thread: Forum members' new models: Let's see them.
25/08/2014 17:57:04
Posted by cymaz on 25/08/2014 14:34:03:
Posted by Hogster on 25/08/2014 13:41:38:

Bob, it's an artf. I have a bit of a thing for 1930 racers.

I love them too.

In my retirement I have the plans for this. Perhaps 1/2 or 1/3 scale

That's mad (in a good way) face 1. I bet your looking forward to retirement thumbs up

25/08/2014 13:41:38

Bob, it's an artf. I have a bit of a thing for 1930 racers.

25/08/2014 08:48:43

This my latest model.

MysteryShip.jpg

TravelAir Mystery Ship. Fitted with an SC70fs. Just waiting for a nice day for the maiden.

Thread: Electricians
23/08/2014 08:25:43
Posted by Stuart Coyle on 23/08/2014 00:37:49:

If you cannot pull down more cable, then consider moving the switch box up an inch - its easier than chasing all the way to the ceiling. If you fit one of those oversize facias, then there is no need to even make good the larger hole!

I had my old fuse box replaced last year and this is what my electrician did.

Thread: Flying Legends airshow
16/07/2014 13:13:46

Thanks CA. It looks superb! thumbs up

15/07/2014 14:22:43

Some great photos guys. Flying legends has become a bit of a annual event for me and my brother over the last few years but we missed it this time.

IIRC a P-26 was due to fly this year. Which I am sad to have missed if it did. I don't suppose anyone got any pictures of it?

Thread: Aluminium Cowl
09/07/2014 19:31:56
Posted by roger graves on 09/07/2014 19:27:16:

Before ali cowls were available it was common practise to visit kitchen equipment suppliers and the like to measure pots/pans etc.

Now that's an idea. thinking

09/07/2014 19:13:53

Thanks guys. That info is very helpful yes

09/07/2014 17:33:36

Hi Guys,

I have acquired a sopwith dove model which I think is based on the flair puppateer kit. It was fitted with a built up balsa and ply cowl. Well, I broke this cowl so I'm looking to replace it with an aluminium one. It needs to have a diameter of 180mm and height of about 115mm. I looked on DB sport and scale and theirs are either too big or too small. I would appreciate any suggestions where I might find one.

Thread: Carolyn Grace Spitfire ML407
18/06/2014 17:40:51

Me too thumbs up

Thread: Free Glue Grab Weekend
23/05/2014 17:48:13

Please stick my name in the hat wink 2

Thread: Cafe Racer
11/05/2014 14:32:21
Posted by Dave Hope 1 on 10/05/2014 18:58:22:

Thanks Hogster. smiley I enjoy the look of 1930s racer planes, so I'm sure my next project will have similar lines.

Well, I'm acquiring quite a collection of that type too. Perhaps we should have a race. My artf sparrowhawk versus your scratch build café racer wink

10/05/2014 18:17:46

Congratulations on designing a stunning looking aircraft and a successful maiden Dave. yes

Thread: Forum members' new models: Let's see them.
07/05/2014 21:37:06

dove.jpg

This is my latest model. Had it's maiden 2 weeks ago but suffered with serious adverse yaw when turning right. I changed the single aileron servo to two so I could program in some differential. And it worked a treat. I now have to get the hang of controlling the vicious swing to the left on take off.

Thread: Hobbyking problem ?
07/05/2014 21:31:01

I have same problem last night.. Web chat with customer service at 11.00am today said they have server problems try again in 2-4 hours. Judging by the time of your post it is still not sorted.

Thread: ok whats wrong with my computer
12/04/2014 21:28:51

A dead cmos battery would only loose date and time settings. During POST the computer checks what devices are available. A dodgy keyboard would usually stop the boot process with a keyboard error message.

So can you confirm that your keyboard is working or not?

Edited By Hogster on 12/04/2014 21:29:18

12/04/2014 21:00:00

Sorry we crossed post. I didn't see that your keyboard is not functioning. If it is a wireless keyboard then the first thing to check is the battery and then make sure it is bound correctly with the receiver.

12/04/2014 20:56:28

Have you tried press the esc for boot menu? If not do so and you should see the option to boot to HDD if it is working.

If not restart and hit Del to enter bios setup. Look for the page which displays your system configuration. You should see listed the drives detected POST (the bleep you here is the completion of the POST) if you don't see a HDD drive listed against SATA or IDE you probably have a HDD failure.

Hope this helps.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Cambridge Gliding Club
Slec
Wings & Wheels 2019
CML
Sussex Model Centre
electricwingman 2017
CADMA
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us