By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Andy Muckley

Here is a list of all the postings Andy Muckley has made in our forums. Click on a thread name to jump to the thread.

Thread: Chip Shop
25/08/2020 18:01:57

Hi Danny, I have, but it needs some attention to the wing, but the rest is almost built. If the weather is good I can bring it down to the field for you at the weekend, or if you like I can meet you there to hand it over any day this week after 10am and before 13.00. P. M. Me if you interested

24/09/2019 12:24:41

Hi limobob.

I am away this weekend but back from Monday, I am in the West Midlands near Wolverhampton if this not too difficult for you

24/09/2019 12:24:38

Hi limobob.

I am away this weekend but back from Monday, I am in the West Midlands near Wolverhampton if this not too difficult for you

22/09/2019 20:55:13

Hi there.

Are you UK based? If so I have a one off offer of an almost built one that I have lost interest in going free if you can pick it up. Still a bit of work to do to it but the main building is all done.

That goes to anyone interested to be fair. Cheers guys

Thread: Silver Wolf's Chipper-too
04/01/2018 18:58:28

Good job mate. I must get mine finished this year,

Thread: Danny's "poor mans Spitty"
26/08/2017 18:44:15

Hi Chris /​Danny, brilliant mate, wish we could be there to support you, but as you know we can't be there. What a journey Danny, and you never know, you may even get placed, it. Certainly deserves to

Thread: What a Joke!!
05/06/2017 17:23:00

Hi all .I would like to say that when i contacted the organiser of the show to book in as a pilot with the funfighter team, i was promptly told that i could not have a pilots pass and would have to pay full price entry and camping fees, even if i was going to fly for the team. So if that was what pilots were beeing told, no wonder there was not a full variety of models and pilots. That equated to six flights over two days, £60 to camp so £10 per flight minus model fuel costs, travel costs, food e.t.c.

No pilots get paid, we do it for the love of our hobby and at our own expence and to hopefully entertain the people who turn up to watch.So we should be aplauding the likes of Team Rouge/Az aerosport/ Global rc/ Cambria Funfighters and as was said in an earlier post, a good portion of the pilots were under 18 years old and most under 30. So where were the more so called experienced pilots supporting the hobby

Thread: Silver Wolf's Chipper-too
14/01/2017 20:01:36

Looking good S.W. nice planking too. I like the dowel idea to keep things nice and straight I may nick that idea

Thread: Martyn's Chippie RCAF 671
09/01/2017 23:11:06

Hi Martyn, that sounds like a plan 2018,

06/01/2017 20:04:47

Hi All. I t would be a great event to fly ,or even maiden them all together somewhere, sometime, like The Master said.(sorry danny) it's like eating an Elephant , one bite at a time. Maybe we need a date/ venue to aim for regardless of quality of finish. what you guys think ?

Thread: Silver Wolf's Chipper-too
04/01/2017 20:16:47

Hi S.W.


This was NEVER A RACE , So carry on as you feel fit, it will get there in the end. I have just got my chippie out of storage and now looking at fixing the two fus half's together and then the first time of glassing a model fully, so i am sure i will make a few more mistakes before its finished, but as you point out , it is the first time for me doing scale too, so don't worry about it , there is always a way out and no where better than here for help. Yes it can drag on a bit and things don't quite go to plan, but then we are modelers, and that's what we do mate.

I bet you finish your's before me

Thread: Chip Shop
24/09/2016 20:00:16

Hi Danny, sorry for the late reply (had to go into work, only just got home angry) i am sure i did mine the same as Colin, Terry and Martin . Sorry but it's nice to know your human mate lol.

24/09/2016 16:53:05

Hi Danny just looked at mine but i have sheeted it and do not want to pull it off . but i have tried to bend the wire backwards and it starts to bend but feels strong, and cant here any cracking sounds, as you would if it was trying to part company. So i hope i have done this correctly. I hope you get some pictures of one that's not been sheeted yet. I will pull the sheet off if you really need me to but don't fancy it unless i really need to

24/09/2016 14:52:33

Hi Danny, thanks, keep us posted on the autopsy

24/09/2016 14:50:19

Hi guys i don't mind either as i am a massive fan of both. If it is the spit, I already have a subject. The spirit of Willenhall. It was one that was used to raise money for the war fund. It went into service in 1941 and was shot down over the channel e.t.c. Arrg i haven't finished the Chipmunk yet lol

23/09/2016 20:54:14

Hi Danny/ All. good job you guys who have completed there models and flew them, i will get stuck into mine over the winter.

Danny any news on the under cart on the chippie ? Bet you haven't had time to take a look at it yet.

Thread: A tale of two Chippies
06/09/2016 20:52:56

Well done John i intend to finish mine for the new season, over christmas

Thread: Danny's "poor mans Spitty"
11/07/2016 12:21:39

Hi Danny sorry to hear that there was damage and i missed the chippy on display, i would have liked to have sen it again, but probably best kept out of harms reach

Thread: A tale of two Chippies
17/03/2016 21:27:11

Still way ahead of me John, keep it up

Thread: Colin Leighfield's Chipmunk build.
11/03/2016 21:32:18

Yes Colin well done

Latest Forum Posts
Support Our Partners
Sussex Model Centre
electricwingman 2017
Advertise With Us
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!