By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Ted

Here is a list of all the postings Ted has made in our forums. Click on a thread name to jump to the thread.

Thread: Windows 10 - Any Advice
03/09/2015 13:26:38

Hi all, I had problems with win7 because of screen resolution the given w10 would not work then I found Gavin Mack's post on page 2 use at own risk but I am in Australia and it worked.

Regards to all, Ted

Thread: RCM&E March photo caption suggestions?
18/02/2015 11:02:34

"Old codgers indeed, We'll show 'em as soon as we get the engine started!

Thread: Repairing loose terminals
20/10/2014 04:18:27

Martin, The duff wire is from the battery to input on esc if that goes it's not dead stick because everything will be dead. Ted

Thread: First big petrol - Evolution 35GT
20/09/2014 07:23:27

Bob, If you read Cymaz again Puffin do make a silencer for a 35 Petrol. Ted

Thread: Is it me?
05/07/2014 06:54:38

Masher, What happens if the voucher is not accepted at the show? Technically its a 'stand' not a shop. A situation like this is where everyone suffers, I try to give cash rather than vouchers for this very reason. Vouchers are not always accepted. What has happened to the saying I was taught when I worked as a grocer, "The customer is always right." Ted.

Thread: Quiet and electric flight international
05/07/2014 00:50:25

Jeff, will post subject on Monday, no post at weekends.

04/07/2014 00:38:21

Jeff, I've cut out the pages that you need black on dark blue unreadable when photo copied. PM your address and you will have it next week. Ted.

Thread: Who's still got a Mick Reeves Focke-Wulf 190D-9?
03/07/2014 07:53:28

Colin I copied and pasted into word your build instructions and they are a little more readable.


Thread: Quiet and electric flight international
03/07/2014 02:53:18

Dane the April issue has part one & May issue has part 2. As it happens I have both is that good news? Now for the bad, I live in Australia. Still if nobody in UK answers I can photo copy both articles and post them, OK for last resort.

Jeff if nobody answers I also have the June issue and could do the same for you.


Thread: Where to buy Pusher Props.
21/06/2014 06:38:43

Hi! according to internet APC have quite a range of pusher props. Ted

Thread: Cambrian Spitfire Mk IX Build Log
25/05/2014 12:47:19

I think perhaps port aileron is pinned on stbd wing? Hopefully anyway. ted

Thread: Irvine Tutor
14/01/2014 02:17:48

Hi David, if you do a search on "Irvine tutor", you will find some information on a conversion to electrifly your tutor. Ted

Thread: Hi everyone
03/12/2013 23:14:19

Hi Birgir. Super bird. We could not be further apart but welcome from Australian Modelers. Ted

Thread: Parkzone 3 cell charger - Mains Adaptor
24/11/2013 03:41:13

Hi David, Imax make a Quatro 4 at once lipo charger as do Hitech. I use a motorcycle size 12 volt battery and charge it with a normal battery charger that I use for my Nissan Patrol battery. Like a lot of others I only charge single batteries the reason is that I don't fancy being around when 4X3S lipos go up in smoke. Ted.

Thread: Anyone for a Tiffie?
08/10/2013 05:43:50

BEB what a masterpiece! Chris has it right, sand the inner to the ribs, sheet wing and finally fit, glue and sand leading edge to profile. Keep up the good work, Ted.

Thread: Inrunner? or Outrunner?
14/08/2013 08:40:59

Sorry Adrian, out runners don't go in ducted fans you need an inrunner matched to the fan. Ted

Thread: Model Restraint
03/08/2013 07:21:57

Masher welcome to the "Utterly confused" post. Nobody but Erflog knows what it is that he is trying to say so don't worry about it, no one else is. Ted

03/08/2013 02:27:03

CS, And so say all of us! Ted

Thread: Bixler motor.
31/07/2013 02:42:52

Hi! searching Hobby King and the forum under "Bixler" I found that the motor ordered by another buyer was 2826-6 2200Kv length 41 mm. with the 2822 motor there is a long and short, with the short being 22mm in length, perhaps you've received a short motor?? Ted

Thread: Removing stickers / transfers
09/07/2013 03:16:28

Hi Mathew You could contact Tim Calvert at Model Markings, maybe if you could cut them out he could sell you copies. I sent him photos and it just happened that he was making the same model and he made mine by sizing them against his model. Just check with him, it would be a shame to spoil a good model with bad markings. If soap and water won't clean them then I can't think of anything that will because they are usually sprayed with something after applying, and what will remove that will remove the markings also. Ted

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Wings & Wheels 2019
Gliders Distribution
electricwingman 2017
Motion RC
Pepe Aircraft
Advertise With Us
Latest "For Sale" Ads
Does your club have a safety officer?
Q: Does your club have a safety officer, or is the emphasis on individual members to each be their own safety officer?

 Yes we have a SO
 No, it's down to everyone

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us