By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for pete taylor

Here is a list of all the postings pete taylor has made in our forums. Click on a thread name to jump to the thread.

Thread: plans for a 90mm edf unit
27/12/2012 08:16:16
Hi Ben, I've got a plan for a TSR2 about somewhere for an ic fan that I intend to convert to edf at some point, I was intending to use a 90mm fan.
I'll dig it out and pass on the details if you like?
Cheers, Pete
Thread: Proud Dad!!!!
13/12/2012 07:57:38
Congratulations and best wishes! I'm not surprised you're proud.

Cheers
Thread: Green Air Designs contact
12/12/2012 10:34:44

Martyn and Ady, thanks for the info. I'll leave contacting Mike until after the Christmas rush when things have calmed down for him a little!

The idea of leaving it to the builder to work out the breakdown of the model seems a sound one, especially given the lump that a 6 ft Canberra is! I think that outer panel and rear fuselage removal will be the way to go, keeping all of the power system intact.

I'll post on the forum when I get going!

Cheers, Pete

10/12/2012 17:38:14

Can anyone shed some light on my small predicament?

I'm keen to place an order for GAD's latest edf EE Canberra (71" no less!) but need to check that it breaks down into sensible bit for transport.

I've tried emailing and phoning but have had no response for 10 days; is this normal for GAD?

Any opinions gratefully recieved.

Cheers, Pete

Thread: Stirring Stuff!!
29/11/2012 13:50:36

Here's a bit of nostaglia for those interested in this period - enjoy!

Thread: Green Air Designs EE Canberra
25/11/2012 21:09:07
Has anyone seen the new GAD EE Canberra for 2 x 70mm EDF?
There's a few details on the website and a compilation of pictures of the parts and CAD generated 3d views but none of the completed model.
Should be great tbough at that size !
Thread: Friday free stuff
23/11/2012 10:46:55

I'm in please!

Thread: Ebay sellers...
23/10/2012 19:06:39

Lucky dip time! wink

Thread: Flat work surface??
20/10/2012 20:34:05
Hi Chuck. I use a offcut of 38mm kitchen worktop with 10 mm fibreboard (as used under laminate floors) glued to the underside to take pins. This leaves the top surface as a flat, hard surface to work on.
Makes a fantastic multi purpose building board for very little outlay.
The only disadvantage is the weight !
Thread: Fokker DVII Colours
11/10/2012 19:11:47

There's a few to choose from here Link

Thread: Free stuff on Friday
05/10/2012 11:17:43

Me too please!

Thread: Durafly EDF Vampire
03/10/2012 21:41:50
I used medium cyano (foam friendly as happens but not necessary, just what o had in) with kicker and thin cyano. Works a treat and quick too!
Thread: Turbo Spinners ???
03/10/2012 19:17:41
Puffin models usually have a variety in stock.
Thread: What are these Planes?
02/10/2012 20:05:36
I'll go for a Gangster too for the first and take a shot at a Junior 60 variant for the second model.
I've got to say that I'm with Alan on the condition though.
Thread: Patriot, Ratatat and Swamp Rat
25/09/2012 20:10:05
Very smart! Classy colour scheme too.
Thread: Nostalgia aint what it used to be!
21/09/2012 11:11:11

LINK Here's an oldie with the ad that caused quite a stir as I recall wink

Sprengbok if I remember rightly - made quite an impression on a 16 year old lad at the time!!!

Edited By pete taylor on 21/09/2012 11:12:49

Edited By pete taylor on 21/09/2012 11:16:26

Thread: Hobby King UK free collection
13/09/2012 19:33:59
Without wishing to lead another HK thread well off track, if the box that the goods are collected in appears to be "...smashed to hell... " I would suggest that they aren't signed for and perhaps another might be selected from the warehouse.
The warehouse staff are not unreasonable people and would not, presumably, select damaged goods for dispatch in the first place.
In many years of experience, transit damage has always occurred just there - in transit!

Just my two penneth worth
13/09/2012 16:45:00
I can vouch for the efficiently of the pickup service. Picked an order up yesterday from the warehouse - works a treat!
Don't forget your order number and some ID.
Thread: 9g servo
08/09/2012 20:06:02
I've just popped 3 Towerpro MG90 balanced serves into my EDF vampire and they seem superb. At 14 g they are heavier than you were after but the same size as 9 g serves with 2.5 kg/cm torque!
Got mine from Giant Shark
Thread: Galaxy Aerojet kit
05/09/2012 18:47:13
Alas, poor Galaxy!
I never did get around to building an Aerojet, but saw one flown years who with the original brushed/nicad setup. It was very impressive at the time and would undoubtedly be even better.
Go for it!
Latest Forum Posts
Support Our Partners
Slec
CML
Sussex Model Centre
electricwingman 2017
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!