By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for pete taylor

Here is a list of all the postings pete taylor has made in our forums. Click on a thread name to jump to the thread.

Thread: Gorilla Glue for canopies?
15/07/2012 22:42:34
Hi Jon, I'm not sure that Gorilla glue is the best idea for fixing canopies as it foams on curing so will probably be messy. Far better to use a dedicated canopy glue.
Cheers, Pete
Thread: vibration!!!!!!!!!!!!!!!!!!!!!!!!!!
08/07/2012 23:00:52
I haven't flown ic for a good few years, but recall a similar problem solved by replacing a nylon engine mount for a metal one. Might be worth a try!
Cheers, Pete
Thread: Galaxy Models, in administration
06/07/2012 12:55:21
Thanks David for removing the earlier post advertising the eBay store on galaxy's doorstep. Most distasteful - mental note to self to avoid in future.
28/06/2012 20:51:39
This really is a great shame. Galaxy and in particular its proprietor,Gary, have been hugely supportive throughout most of my aeromodeling life of 40 years or so. I hope that a way forward can be found for this pillar of the trade we all rely on for our pastime.
I'm sure that I speak for many thousands of past and present customers and friends in wishing Gary and all of the staff at galaxy all the very best for the future with heartfelt thanks for the professionalism given to aeromodeling worldwide.
Thread: Friday free stuff
08/06/2012 13:08:25

Yes please !

Thread: Tony Nijhuis' new Vulcan
07/06/2012 15:52:42

For what it's worth, I think I'd be tempted to adapt the design for twin pusher configuration anyway.

Cheers, Pete

Thread: Ebay sellers...
26/04/2012 16:31:02

Oops! - apologies all roundblush

26/04/2012 09:24:23

Here's another bargain waiting to be snapped up! wink


Edited By Steve Hargreaves - Moderator on 26/04/2012 15:30:42

Thread: Algebra 100 CoG?
12/04/2012 13:25:56

Hi Simon, I've just checked on the plan of the Algebra 2.5m which is the same as the 100 (unless we're talking about the earlier ripmax Algebra 100) and the CG should be 140 -145mm from the wing root trailing edge with a warning from Mr EMP about having it any further back.

Cheers, Pete

Thread: Wot 4 E mk2 vs standard wot 4
04/03/2011 14:58:23
Thanks for all of your input chaps. I've just flown my new Wot4 and am mightily impressed!
I finally went for an Emax 2826 06 with a 12x8 apc e, 4s 4500 mah Loong Max lipo with a 60 amp Hobbywing esc.
Figures are 863 Watts at 54 amps, giving around 155 w/lb - Hovers quite well!
I'll try to upload some pics for anyone interested.
Cheers, Pete
16/02/2011 17:35:44
Right, that's it then! Full sized Wotty it is with a thumping great outrunner in the front! Lol
Seriously though chaps, many thanks for your comments.
I'd had in mind a 700+ watt motor with a 4 cell 4500 mah LiPo, sounds like it might be just about enough.
I'll post the results here.
Cheers, Pete
15/02/2011 20:06:50
Has anyone got experience of these two artf's flying side by side? I can't decide whether to go for a full-sized conversion or stick with the 90% sized E version.
Any comments would be most appreciated.
Thread: Priory models Lancaster
27/01/2011 22:44:38
Does anyone know if the Priory Models electric Lancaster kit is still available?
Contact details would be great.
Cheers, Pete
Latest Forum Posts
Support Our Partners
Sussex Model Centre
electricwingman 2017
Advertise With Us
Latest "For Sale" Ads
NEW POLL - has the pandemic altered your event safety perceptions?
Q: Has the covid pandemic deterred you from attending shows and events in 2021?

 No, I'll be attending just as many as I usually do
 No, but I'll choose my event with greater care
 Yes, I'll attend fewer events going forward
 Yes, I wont attend any where previously I have

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!