Here is a list of all the postings Mike Morcher has made in our forums. Click on a thread name to jump to the thread.
|Thread: Getting a Skywalker Falcon ready for FPV|
Hi Johnny Its a 808 (16) car key micro camera
We are back ready to go, but its raining !!!!!!!!
And how things can go wrong
|Thread: How to kill off one man|
The email from the MFNZ makes very interesting reading and it dose look like Bruce is his own man, not always right, it’s a shame as he makes some very good videos and it looks like this will run and run.
Let’s hope he takes his foot out of his mouth and continues making good videos.
We hope !!!!!!!!!!
Well have you seen Bruce’s video and what do you thing of the Model Flying New Zealand and the CAA.
What can be done for this man?
It could be you next?
|Thread: General questions about R/C and FPV|
I agree with Biggles you need to learn to fly a RC plane, a Bixler 2 would be fine, then you could look to fit the FPV gear for more info have you looked at = **LINK** and good luck Mike
|Thread: Flying in confined space tutorial 1,,,, and What to do if you get stuck in a tree tutorial 1|
|Thread: The Naughty Boys of Hexham try FPV|
Now I know what to do, many thanks
|Thread: Parkzone SE5A chat|
Edited By Mike Morcher on 11/08/2012 18:17:49
Yes they do fly well as per mine,
Edited By Mike Morcher on 11/08/2012 18:15:44
Will a specktrum 6200 and remote receiver fit in the SE5a?
They fly so well on electric, so some more flying on the Mag.
Edited By Mike Morcher on 23/05/2012 20:45:20
Well we are up and flying again, new 4s 3600 battery and she flys very well
Shame about your motors,when you have the new ones fitted power up your Quadcopter and speed up but not to lift off or fly then hold it above your head and rock it about you will feel it stabilize, also you should have the pots set to 3/4 and then try lift off, you then adjust to suit you.
This is just an update video =
Edited By Biggles' Elder Brother - Moderator on 08/04/2012 16:15:03
The build is going fine, now into the testing and flying ie hops next video flying
Edited By Biggles' Elder Brother - Moderator on 08/04/2012 16:08:17
We are get there, just got to get 3 small cables for the receiver and then we shall see ?
Ok looks like my board is set up for KKQuadrocopter (+ Configuration) as its V2.3 if it was X Configuration it would be KKX and not KKQuadrocopter, but we will see when I power it up.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!