By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Jose L. G.

Here is a list of all the postings Jose L. G. has made in our forums. Click on a thread name to jump to the thread.

Thread: K3736- MkI Fury-Jose L.G.
15/10/2018 11:17:27

Thanks to all of you for following.

The second Fury (Spanish one) Will be on the queue. Will have some improvements and alterations…..

Cheers.

José Luis

14/10/2018 19:42:36
Yes.
I have been looking at the plan the last months and think I have It fully sorted but today looking at the top/bottom view i have discovered the horizontal parts that run alongside the fuse.

If !

Edited By Jose L. G. on 14/10/2018 19:43:09

Edited By Jose L. G. on 14/10/2018 19:44:22

Thread: RAF's Finest Biplane? Hawker Fury MkI
14/10/2018 19:02:02

Hi to all.

Found some Dubro old timer wheels in 1/6 scale at



**LINK**

Thread: Tony B's replica
14/10/2018 18:55:52

Hi Tony,

Nice progress on your fuse ….. and instrument panel.

Will be it available (The instrument panel)?

Cheers.

José Luis

Thread: K3736- MkI Fury-Jose L.G.
14/10/2018 18:52:46

Now drying until tomorrow under weight and pinned to the board.

Cheers. José Luishpim1510.jpg

14/10/2018 18:51:30

Thanks guys.

Some progress…...Prepared the ply parts for the fuse. Trial fited both formers and ply sides. Marked the sub-formers positions on both sides noting the diference betwen the left and right. Once satisfied glued the formers and ply reinforcements on the right side. I usually mark the sides and put back to back to avoid doublé side síndrome.

Taking note of the advise of Danny I had made anew F1, 50 grams less tan the ply one.

Some pics….

hpim1507.jpg

This is the former F3 included in the kit. This is OK for the Mk1 model but Will be changed for the Spanish Fury. That big hole in the middle must go because I´m going to fix the landing gear to this as a cantiléver one.

Next pic. Checking the parts over the side panels.The position of the side formers has been marked inside and out.

hpim1508.jpg

12/10/2018 10:07:26

Thanks, Sir.

Patience and some sticks refused for over sanding the joint área......

Cheers.

Jose Luis

12/10/2018 10:04:30

I forgot, The cross over sticks are from the sheet that is made the front part of the fuse.

hpim1506.jpg

12/10/2018 10:02:26

Well.

I´ve been working of the fuse the past days. Now I have both sides made: Once dry the first I leave enought pins for placing the second over it. Put some wax paper over the cross over of the sticks and fixed with pins the front part of the fuse and built the second stick part.

Before beginning the building I weighted the sticks of balsa, betwen 2.6 to 4.9 grams, Selected those abot 3.2 grams, (this weight is because there were a few around this weight).

Tomorrow I´ll go to fly, so probably Little building in the class…..

hpim1503.jpg

First side drying.

hpim1504.jpg

Second side (Left) built over the right side.

hpim1505.jpg

08/10/2018 17:15:16

Hi William,

You are correct about the length of the tube. Once epoxy glued in their groove I`ll aply a fine fiberglass bandage over it and the balsa. This increase the gluing force of the part.

Cheers.

Jose Luis

08/10/2018 12:31:40

I`m going to use pull-pull for the tail parts. As the original both elevators Will be linked with a tube (carbon in my case).

Jose Luis

08/10/2018 12:29:40

Top of the stab and elevators finished. This afternoom I`ll make the other.

Cheers.

Jose Luis.hpim1502.jpg

08/10/2018 12:27:51

When checking the plan and the 3 views I noted that there is a missing sub-rib near the tips, so I marked the cores to remember it.

hpim1499.jpg

08/10/2018 12:25:36

Back to building after a few days of relax.

Cut the longuerons from a shest of balsa with the balsa-stripper (Great Planes ítem). Mainly framed the leading Edge, tips and some ribs for delimiting the parts. Later added the red of the ribs.

hpim1497.jpg

hpim1498.jpg

Thread: RAF's Finest Biplane? Hawker Fury MkI
07/10/2018 11:31:22
Hi Danny.
I've been Out, so no building also. Todas I've framed the stab and elevators. Still need to add a few parts.

Cheers.
Jos? Luis.
03/10/2018 12:05:10
Chris.
No problem. Always a few eyes are better than one pair.....
03/10/2018 12:02:28
Hi Mart?n.

Only ailerons on upper wing.

Edited By Jose L. G. on 03/10/2018 12:03:07

Thread: K3736- MkI Fury-Jose L.G.
03/10/2018 11:43:53

Stab and elevators marked over the plan an the other side marked with setsquare (3D printed…..

hpim1496.jpg

03/10/2018 11:42:31

Awaiting the glue to dry.

hpim1494.jpg

03/10/2018 11:41:06

This morning I have cut the hole for the rigging wire on the fin. Marked the position of the ribs an repeated the process of gluing ribs in the other side. Drying until next day.

I didn`t make the cut-outs for the hinges because I have decided on using robart hinges (Not originals these are from Great Planes), whwn profiled I`ll glue the reinforcing blocks before drilling their position.

hpim1493.jpghpim1492.jpg

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Gliders Distribution
Pepe Aircraft
electricwingman 2017
Addlestone Models
Cambridge Gliding Club
Slec
CML
Wings & Wheels 2019
Sarik
Advertise With Us
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us