By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Jose L. G.

Here is a list of all the postings Jose L. G. has made in our forums. Click on a thread name to jump to the thread.

Thread: RAF's Finest Biplane? Hawker Fury MkI
03/10/2018 11:30:05

Hi Chris.

I marked the cores over the plan, so I think that the diference must be there. Its only the thick of a rib so probably difficult to seein the pics. I`ll check when dry.


José Luis

Thread: K3736- MkI Fury-Jose L.G.
02/10/2018 17:42:06
Hi Chris. Thanks for subscribing.
02/10/2018 15:19:49

Tomorrow I`ll cut the hole for the screw, hinges, horn before gluig the ribs on the other side.

José Luis.

02/10/2018 15:17:42

Hi there Friends.

Yesterday I re-read the plans and the scale documentation I have on the subject.

Noting a few subtle diferences betwen the MK I and the Spanish Fury that I have not seen ( the cowl is longer, deeper in the nose, different panel lines, exhaust position, lowres, ….

So I also begin the construction with the tail. I`m using Wood glue so until tomorrow it Will stay pinned in the board.


Thread: RAF's Finest Biplane? Hawker Fury MkI
28/09/2018 11:47:43

Hi Ernie.

Just received my metal parts. Good job.


José Luis


Thread: S1581 Hawker Nimrod MkI
27/09/2018 09:26:19


Hi Danny.

Also clearing the work bench. Just finished a glider, ASW-28, almost 4 meters in span. Other projects in the pipe. Soon to be gluing balsa (Hope not on my fingers)….

Ordered the forkends for both planes. Thinking on landing gear for the Spanish Fury……. Get fun begings.

José Luis.

P.S.: charging camera batts.

Edited By Jose L. G. on 27/09/2018 09:26:57

Thread: RAF's Finest Biplane? Hawker Fury MkI
12/09/2018 08:05:07


I have plenty of Litho plates (I Think !) So I´m going this route for the nose of my model.

José Luis.

P.S.: Nice subject Danny.wink

24/07/2018 09:45:27

Ernie .

Money sent for two sets of parts.


José Luis

Edited By Jose L. G. on 24/07/2018 09:46:24

23/07/2018 14:21:55

Hi Martin.

Usually the aluminum spinners (scale) don`t have the prop cutouts. You have to make your own cuts.

I`ve made a silicon mould and had made a few carbon spinners for the community…...


José Luis

23/07/2018 14:19:01

Hi Ernie.

Great work on the metal parts.

I`m interested in two sets of parts.


JoseLG (Previously in the listing)

Thread: K3736- MkI Fury-Jose L.G.
30/06/2018 08:45:51

Well This will be my projected Fury for the Master Class.

In the back ground I`m going to build a second model of the Spanish Fury.


José Luis

30/06/2018 08:42:48

hawker fury mki_k3736.jpg

Thread: RAF's Finest Biplane? Hawker Fury MkI
30/06/2018 08:38:46

Hi Ernie.

How about the exhausts stubs?

A nice rectangle to fold in an almost oval shape

Edited By Jose L. G. on 30/06/2018 08:59:47

29/06/2018 09:22:11

img_20180629_095249.jpgHi Fury builders.

These are my proposed schemes…...

hawker fury mki_k3736.jpg

08/06/2018 17:43:03
Mine Will be Also electric. Prop Will be Scale.

Edited By Jose L. G. on 08/06/2018 17:44:17

30/05/2018 11:36:41

Hi Danny.

I´m also interested in Wood, fiberglass and metal parts.

José Luis

04/03/2018 11:29:17
Posted by Klippy on 03/03/2018 09:39:20:

Thanks for the list Jose, What span and plan are you going for?

Well, I`m going with the Bryant plan that is 1/6 scale and 60" span.

At this moment I´m thinking of building Two models, one Mk 1 and another of the Spanish Fury as I`ve found some good infomation.

Will be interesting not to duplicate any tareas as the spinner. I can made a few carbon or fiberglass ( free of charge) and send to an address in UK and from there picked for the recipients.

Danny are you interested in pick an order of spinners?

José Luis

25/02/2018 08:45:21

Good morning.

This is "my bill" of materials for the Fury Mk I.


Main stucture; 3/16 x 3/16" médium balsa (6)

Side and top longuerons: 3/32 x 3/8" médium-hard balsa (20)

Sheet balsa:1/8" (1)

Sheet balsa 3/32" (1)

Harwood for central Hood. 3/8 x 3/8"

Harwoowd for motor mounting 1/2 x 5/8"

Ply 1/16"


Spars hard balsa (pine?) 1/8 x 1/4" (16)

False leading edge from 1/8" sheet

Leading edge from médium 1/4" sheet

Sheeting for "D" box médium 1/16 sheet (3)

Capstrips médium 1/16 x 1/8" cut from 1/16" sheet

Ailerons from 1/16 and 1/4" sheet

Wires and tubing

Stab suport aluminium 18 swg.

Bracing for stab , piano wire 20 swg

Landing gear , 8 swg (1), 10 swg (1), 16 swg and 12 swg

Cabane struts from 10 swg

Brackets for rigging brass 20 swg

Bracing of cabane and wings piano wire 18 swg

Of course you will need a pair of wheels about 5" in diameter and hinges for the tail. Also some fiberglass board for the aileron hinges and horns.

23/02/2018 18:48:35

Good afternoon

Well, err... Yes I have made a bill of materials as I have metric Wood in stock.

I have ordered all the Wood and metal I will need in the construction of the model. I can post a list if anyone is interested.

José Luis

17/02/2018 17:22:20

Hi Danny.

The front of the cowl matches the plan. It`s 98 mm in diameter,

I have made a carbón spinner .


Jose Luis

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Support Our Partners
Addlestone Models
Wings & Wheels 2019
electricwingman 2017
Cambridge Gliding Club
Gliders Distribution
Pepe Aircraft
Advertise With Us
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us