By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for malcolm woodcock 1

Here is a list of all the postings malcolm woodcock 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: Giant Shark - what's happening?
04/05/2015 15:56:37

Stopped using them when they charged me postage for a duff charger they sent me even when they'd re-imbursed me for it. Only wanted dialogue after I mentioned it on the forum, swore then never again.

Thread: How much do you have invested in your current models and kit?
01/05/2015 10:20:19

I find my spending on models/rc gear is still cheaper than renting beer by the night, it's also more enjoyable.

Thread: Biggles' Mess (the renamed cafe!)
28/04/2015 15:17:51

Many thanks Daithi, just what I was looking for.

28/04/2015 12:56:25

Just putting this out there if any one has the construction instructions (plans) for the Tech-one 'Fresh'. I have the kit but have misplaced the plans/instructions.

Thread: Cheap attempt to trick.
08/04/2015 09:42:12

A few years ago I ordered some DVDs from Amazon, for a friend, and had them sent directly to her address but under my name. Now, even after being very careful to tick the right boxes, I get snail mail spam from some one flogging mobility scooters. Now Amazon are the only people who had my name linked to that address so I don't use Amazon anymore.

Thread: Ultra-fast charging aluminum battery offers safe alternative to conventional batteries
07/04/2015 09:32:47

Only hold 2 volts at the moment but lets hope for progress.

Thread: TV Licence
29/03/2015 21:22:32

Joined the RAF at 15 and spent a lot of time abroad so never picked up the habit. Don't no how people have the time for all the rubbish on TV, between karate training, aeromodelling, listening to the radio and visiting friends, I never have time for it.

Thread: Control issue on new Go Discover / Spektrum DX7
21/03/2015 15:15:03

It would be worth looking into any dry solder joints between motor/ESC/battery.

Thread: Winter seems to have arrived, who's been flying?
20/03/2015 15:35:21

Watched the eclipse this morning, in North Yorkshire, through some intermittent high cloud but don't throw away those special glasses just yet, there's another one along in 2090 I hear. Went flying again, after eclipse, ten flights before it got too hairy. Surprised the amount of trimming needed after Winter storage but only needed to change two servos.

19/03/2015 17:01:45

First time out this year, ten flights of over 5 minutes each, brilliant. Right amount of breeze and sunshine. Bring on the eclipse tomorrow.

Thread: Multiplex Rockstar
18/03/2015 09:38:58

Oh dear, I can feel money draining from my bank account already.

Thread: Ebay sellers...
14/03/2015 17:41:09
Posted by Stevo on 14/03/2015 13:28:36:

Ummm.... anyone used this ?

Wonnt be putting my soldering iron away yet!

Tried it once, it won't replace solder. It's alright for repairing boards won't take any kind of strain.

Thread: Electric Ducted, err, two bladed fan, not micro.
08/02/2015 21:38:32

Now that's a EDF that flies at the kind of speeds that I like.

Thread: no mower? this is just the job
10/01/2015 11:41:20

Years ago the late Mr A. Garnett of Colne said he always used the coverings used by market stall holders for temporary runways and it always worked for him.

Thread: Closing The Battle of Britain Chapel
08/01/2015 11:59:58

Heard from a fellow Boy Entrant, who served at Biggin Hill, that it has been on the local news that the Chapel has been saved.

05/01/2015 08:33:09

Signed and put on Facebook so that 51st Entry of Boy Entrants, RAF, can also get on the case.

Thread: English Electric Canberra
01/01/2015 11:12:39

I remember that, I think it was the Chief QFI, 16 Squadron. Used to drive the groundcrews mad by doing aerobatics on the airtest after they had just fixed it.

Thread: Giant Scale English Electric Lightning
31/12/2014 21:18:18

Sooner or later some bright modeler will find a way to insert a after burner in a model like this. before people pooh-pooh me I come from a generation who never fore saw the model jet engine.

Thread: Gatwick drone pilot arrested
31/12/2014 21:05:23

It would appear that 'plod' has forgotten that he's the servant of the people not the master. This is what happens when unlicenced people try to to take the Tx off of a licenced person.

Thread: Have a Rant
30/12/2014 11:26:18

JM only lost 2 million but all the rest of the workforce lost their whole income/livelyhood.

Support Our Partners
Slec
Sussex Model Centre
electricwingman 2017
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!