By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for Anthony Scott 2

Here is a list of all the postings Anthony Scott 2 has made in our forums. Click on a thread name to jump to the thread.

Thread: Broken servo arm screw
24/08/2019 17:31:53

I use Tippex, on exhaust pipe screws it heat hardens but can still be released as required.

Thread: Seagull Turbo Raven
15/07/2019 16:17:51

I have a pair of wings & the joining tube in perfect condition. Available to anyone who can collect from Sandwich/Dover.

Mine flew very well, electric powered, until the rx battery failed.

Thread: CRRC 26cc - Plane suggestions
08/06/2019 09:11:05

One of my colleagues had large Seagull Space Walker powered by this engine. It flew very well,mostly at half throttle so noise was not an issue.

Thread: Simple arduino altimeter
24/05/2019 21:16:48

Thanks.

24/05/2019 20:30:51

Yes please.

Thread: Forum members' new models: Let's see them.
08/04/2019 10:21:36

My Seagull Spacewalker, Laser 150 power.

img_20190326_131216.jpg

Thread: Help please, broken plug cap
05/04/2019 13:19:02

Thanks Ron, worth a try.

04/04/2019 16:04:46

Many thanks F1 for the link to BigPlanes, they are a new name to me & offer better value than Perkins.

I have identified an alternative plug but not the CM6, it is too small in diameter.

04/04/2019 11:48:29

img_20190404_110156.jpgHello, I recently took the u/c off my Acrowot XL. The Roto 35 powering it is mounted inverted & the plug cap took enough impact to tear the cap from the HT lead. There is no other damage. The Roto uses an unusual plug which is flat topped so a conventional plug cap is not suitable. A new CDI unit is £120!!.

Can anyone help with re-connecting the plug cap to the HT lead, please?

Tony

Edited By Anthony Scott 2 on 04/04/2019 11:51:05

Thread: Favourite Non Scale Sport Bipe?
08/02/2019 13:05:22
Posted by Chris Walby on 08/02/2019 12:51:04:

Another Wots Wot

Not flown any other bi-planes, but it seems nice enough with electric with no unwanted traits. Rather lively with the 3 turn spin on the first go, but after a cup of tea I am okay now!

20170417_144024_1492535997091.jpg

I really enjoy my TT75 powered version. Like all CF designs, it flatters my flying!

Thread: AcroWot XL Build
05/02/2019 20:41:03

Only weak spot I have found it the ply undercarriage plate. it's not crazy weak, but doesn't like bad landings.

I am glad I am not the only one to experience this!!

Thread: Winters Here Who's Been Flying ?
23/01/2019 13:33:00

According to an item in the DT today, someone was flying a Tundra on Christmas Eve. Unfortunately, he was in a park too close to Heathrow & he was fined £2k! Seen by police & apprehended.

Thread: Hobby King's Web site ????
02/01/2019 17:00:30

I too use a Halifax Clarity card, a definite saving.

Thread: BMFA Website down...?
24/12/2018 16:05:58

No problem for me -W10 & Chrome.

Thread: Gatwick drone incident
20/12/2018 10:49:50

Terrorism or an unfriendly state recently exposed to ridicule get my vote. Tremendous disruption for little cost.

Thread: Rimfire or AXI
15/12/2018 14:05:01

Where did you find the KA8 please?

Thread: FlyFly Models
05/12/2018 14:42:31

My Fox has proven to be great value for money. It flies well in a wide wind speed range, is aerobatic & has survived its share of slope side arrivals. I would happily have another.

Thread: Acrowot engine
17/09/2018 20:56:01

Do you fly on Ladies' Mile? I did 40 yrs ago.

Tony

Thread: Log in problems
23/07/2018 14:04:02

I have just had to reset my password after several years' use of the previous PW.

Tony

Thread: Radio systems
19/05/2018 07:20:54

My Flash 8 is telemetry capable as standard for Rx battery with Maxima & Optima Rxs. There are telemetry modules available for:-

GPS

RPM

TEMP

SERVO CURRENT DRAW

AIRSPEED & ALTIMETER

Latest Forum Posts
Support Our Partners
CML
Slec
Sussex Model Centre
electricwingman 2017
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!