|Peter Russell 3||21/05/2015 18:46:32|
|8 forum posts|
The 2 wing mounted servo's are they wired to one channel using a y lead?
Presumably the servo function reverses on the one servo because of the way they are mounted.
Has any body managed to get the plan reverse printed to do the left half.
Ive tried today but drawn a blank because I need some one who can scan A1 size drawings.
|645 forum posts|
Peter, so long as the servo arms are on opposite sides then the ailerons will work correctly i.e. one up and one down. check that for left aileron control the left aileron goes up and vice versa - if not reverse the aileron control at the Tx
1556 forum posts
A 'Y' lead is OK if built as plan. If you want differential the servo arms will need off setting.
A good copy shop should be able to scan as large as AO My local copy shop is in Cleckheaton Yorkshire, but you have no profile so that may not help.
Please login to post a reply.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!