|Bruce Austin||21/01/2016 17:14:06|
|242 forum posts|
The other day I started searching for a particular type and size of outrunner to electrify my Zupair Zulu.
I then started to realise that I lacked the terminology to determine: various features that I was looking for.
E.G I want to mount the motor on the firewall, from inside the fuselage, so the shaft needs to protrude from the motor mount end. The shaft needs to protrude18 to 20mm. A 3mm to 4mm diameter shaft would be ideal
I'm looking for approximately 120 watts on 3S driving a 7x4 folding prop.
One motor that is aparently close to this is a D2225 1350Kv, but not readily available in UK. That's when I started my search but I couldn't put the data into any search engine.
Is there a way of doing this??? I suspect not, but I thought I would ask.
Note, I am not trying to calculate my electrical requirements, just the physical dimensions, and motor mount/ shaft orientation.
Go With the Flow
955 forum posts
Suggest you ring BRC hobbies with your parameters very helpful people with lots of motors to choose from
Please login to post a reply.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!