By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

Engine projects

or I THINK it's all there ?

All Topics | Latest Posts

Search for:  in Thread Title in  
jeff2wings09/10/2018 21:59:55
avatar
798 forum posts
1925 photos

Crankshaft finely finished ,just need to shim the r/disc and then ream the conrod ,assemble,and then run !

imga0398.jpg

jeff2wings12/10/2018 20:22:22
avatar
798 forum posts
1925 photos

Project Meteor 61 RV done!

imga0402.jpg

imga0405.jpg

imga0408.jpg

imga0407.jpg

The next project I'm looking at is a 20 cc V-twin 2 stroke

TartanMac13/10/2018 06:32:30
avatar
250 forum posts
157 photos
👍 Looks the business Jeff well done. W
ill be watching out for the V Twin project sounds like a challenge for sure.
jeff2wings03/03/2019 14:39:22
avatar
798 forum posts
1925 photos

With all these engine projects done,I need to finish the test stand

imga0080.jpg

imga0077.jpg

just needs a coat of resin to fuel proof

jeff2wings23/03/2019 21:23:44
avatar
798 forum posts
1925 photos

Finally found time to slap on some resin,with luck should be running up the first (of many) engines tomorrow smiley

imga0001.jpg

imga0002.jpg

jeff2wings24/03/2019 17:07:28
avatar
798 forum posts
1925 photos

So finally got to run up some engines today,but before I could I had to take the battery off my Suzuki as all my other 12v's were dead frown

imga0005.jpg

This is the Merco at the very start of this thread minus paint

imga0009.jpg

Irvine 36 ring nice runner

imga0011.jpg

not often seen,an MDS running ! laugh

paul coleman 124/03/2019 17:13:06
117 forum posts

jeff i take it you are an engineer,that test stand looks the dogs pal,excellent, i see your into your bikes too,so i suppose that comes in handy when it comes to engines,well done,good job.

GrahamWh24/03/2019 17:58:47
avatar
356 forum posts
53 photos

NIce one Jeff. There's a guy at our club that like MDS - though I think he sometimes flies his to wind up a guy that doesn't!

Bruce Collinson24/03/2019 19:36:56
409 forum posts

Fascinating Jeff.

2 questions.

What’s the other end designed for, is it some sort of radial mount?

Will there be a tacho fitted behind the “firewall”?

BTC

jeff2wings29/03/2019 18:18:57
avatar
798 forum posts
1925 photos
Posted by paul coleman 1 on 24/03/2019 17:13:06:

jeff i take it you are an engineer,that test stand looks the dogs pal,excellent, i see your into your bikes too,so i suppose that comes in handy when it comes to engines,well done,good job.

Well sort of,I'm a welder/fabricator by trade but after 40 years in the industry you pickup other skills along the way like milling /turning ,but I'm no expert,just an enthusiastic amateur !

Yes that's a radial mount for larger engines and I will be looking into a fixed tacho.

Just finished off a OPS 40 SLA that a very generous member on this forum gave me along with a Meteor 40 for

restoration.

As it came out the box

imga0349.jpg

imga0350.jpg

imga0351.jpg

and now

imga0012.jpg

imga0017.jpg

imga0021.jpg

imga0018.jpg

jeff2wings19/04/2019 19:01:31
avatar
798 forum posts
1925 photos

Well now the test stand is sorted out now,it's time to run up the Meteor 61 RV

imga0039.jpg

imga0040.jpg

it runs !! and it runs very well ,once it's bedded in I will do some prop test and compare it to the standard engine

jeff2wings20/07/2019 21:44:20
avatar
798 forum posts
1925 photos

After the success with the meteor I thought I would try something similar with a Merco but this time with reed induction !

img_20190720_203101.jpg

going to 'cheat' and use the original crank but may have to make a piston (broke)wink

jeff2wings10/08/2019 21:20:46
avatar
798 forum posts
1925 photos

Rather than use a reed(or clack valve for the ancient modeler ) have gone for a rear drum,I will try a reed later when I have worked out how to make one !

img_20190810_171725.jpg

img_20190810_175906.jpg

jeff2wings11/08/2019 21:59:33
avatar
798 forum posts
1925 photos

Well plenty of chips but no fish smiley

img_20190811_124733.jpg

img_20190811_210142.jpg

img_20190811_210152.jpg

img_20190811_210111.jpg

Tim Flyer11/08/2019 22:24:44
avatar
1116 forum posts
214 photos

Very impressed with your work Jeff 😊. Well done !

jeff2wings22/09/2019 19:40:22
avatar
798 forum posts
1925 photos

Thanks Tim.

Just finished refurb on this MAC (MDS) 10 cc,and just for fun,made the muffler into a double chamber to cut the db's

img_20190922_100312.jpg

img_20190922_102633.jpg

img_20190922_102736.jpg

jeff2wings22/09/2019 20:22:17
avatar
798 forum posts
1925 photos

Forgot to add this pic

img_20190922_102815.jpg

jeff2wings12/10/2019 20:06:46
avatar
798 forum posts
1925 photos

Latest project

img_20191012_193033.jpg

img_20191012_193024.jpg

img_20191012_193014.jpg

anyone like to guess what it is/was ??

Denis Watkins12/10/2019 20:38:05
3927 forum posts
61 photos

Irvine Jeff ??

Beautiful work

 

Edited By Denis Watkins on 12/10/2019 20:38:55

ASH.12/10/2019 22:32:02
avatar
310 forum posts

Nice work Jeff.

BTW nothing wrong with MDS. My 48 served me well and got me through my A test to everyone's amazement.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Cambridge Gliding Club
Wings & Wheels 2019
Slec
Gliders Distribution
Pepe Aircraft
electricwingman 2017
CML
Sarik
Advertise With Us
Do you use a throttle kill switch?
Q: This refers to electric-powered models but do you use a throttle kill switch?

 Yes
 No
 Sometimes
 Rarely

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us