Stevo finally gets on the case
|2699 forum posts|
Yep Mike - luthier (or Klempsia) clamps. I have built a few guitars over the years and found them to be ideal.
OK.. Spokeshave and sandpaper in hand.. the following photos tell a story.
So I dont simply glue the tail in and hope for the best. Fortunately it has a very visible thrust line along the fuse, so easy to line up the tail incidence. The tail's L.E is up slightly, I measure 3mm along a 270mm length of the gauge, wrt the thrust line..... so Arctan(3/270) comes out as around 0.6 degree, no bad thing. I did have to adjust the stab seat though!
|chris meek 1||22/10/2017 17:02:26|
149 forum posts
Hi stevo - really enjoyed reading through the blog so far, useful to see your work cutting the fuselage formers.
|2235 forum posts|
I have found your Stuka blog Stevo I have a lot of reading to catch up, bookmarked 👏 no like button but found an applause emi
|Dwain Dibley.||23/10/2017 19:06:19|
1270 forum posts
That's a mighty shapely bit of err.......................................Shaping Stevo.......
Joking aside it's coming on a treat matey.
|Tom Thomas||23/10/2017 19:33:22|
315 forum posts
|McG 6969||23/10/2017 20:16:23|
2642 forum posts
... couldn't find the 'like' button... so,
|Frank Boone||31/08/2018 20:23:30|
|1 forum posts|
It's been a long time....how did you get on? Did you finish the build? I am also starting to build this, would be great to see how you finished it.
Please login to post a reply.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!