exhaust problem, can you help?
|Alan Dorrell||11/08/2008 10:47:00|
214 forum posts
|I have been building Peter Miller's CAP 21 from the plan and article in this issue. I have just been fitting the motor, an SC32 like Peter has used and although I thought I had read the article thoroughly, I had missed the bit where he says a manifold extension to the silencer is needed to clear the silencer in this canted position. I have looked up the parts lists on J. Perkins website but find no mention of such an article. Is one commercially available or did Peter have one specially made? Could you or Peter solve this conundrum for me please. I have returned to aeromodelling after a gap of 30 years. I used to fly Stunt but wish to master R/C while I'm still able.|
|Bob Cotsford||11/08/2008 11:58:00|
7973 forum posts
|try looking for an OS or ASP one, they certainly do them for larger engines. Or try Just Engines, they are usually very helpful.|
|Jim Carss||12/08/2008 20:50:00|
2066 forum posts
As Bob says Just Engines is the place for your silencer spacer.
Look under Accessories and then exhaust accessories and you will find them there priced at £8-99 for the 35mm spacer.
I built the Cap 21 a while back and it goes like stink on SC 32.
|M Eastelow||19/08/2008 20:41:00|
|4 forum posts|
I Built the CAP 21 last year powered by an OS46LA. A bit overpowered for a rookie like me but good fun while it lasted. See it here Cap 21
|Peter Miller||26/01/2009 18:51:56|
10182 forum posts
|Just engines supplied my extension, it is an OS item|
|Peter Miller||27/01/2009 08:41:44|
10182 forum posts
|For other builders who have not got that far. just change the angle of the engine so the silencer clears the side of the model|
Please login to post a reply.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!