|Olav Sivertsen 2||03/01/2018 19:32:53|
8 forum posts
Hi.Having almost completed the Sprite balsa model published in the Special Issue 2017 RCM&E mag,I think there is a problem with the dimensions of F1 motor bulkhead.Having made it to the size printed on the plan and fitted it to the fuselage I found that when fitting the motor the thrust line appears to be 6 mm below what is indicated on the plan.The photos of the build shows that F1 appears to extend above the fuselage sides but the dimensions on the drawing for F1 prevents that.
However I am questioning what effect the thrust line being below what is shown on the drawing will have on this model. I am reluctant to do major surgery around the nose to correct this problem.
|olav sivertsen 1||04/01/2018 15:33:06|
|3 forum posts|
Reference to my previous post.Problem solved by-making a new F1 bulkhead out of 1/6th ply to the dimensions on the plan side of the fuselage,incorporating the shape of F1a.Re drilled all holes for mounting motor-and glued the new former to the original. Saved chopping off front end etc.Hope this might help if anyone else found this a “problem”!
|Tim Hooper||05/01/2018 21:25:25|
2899 forum posts
Thanks for the solution, Olav!
I no longer have my original hand-drawn plan to refer to, but it's possible the discrepancy is my own drafting fault!
|Olav Sivertsen 2||05/01/2018 22:10:58|
8 forum posts
Hi Tim,Sorry It wasn’t a criticism,just an observation which I thought might help anyone else building this model.I know how difficult it is when trying to put a sketch into a plan,you can check and check again but still miss something.Anyway,it’s almost finished and hope to maiden when this blessed windy weather abates. WIll let you know how it goes.
Please login to post a reply.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!