By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

Lidl Sander

All Topics | Latest Posts

Search for:  in Thread Title in  
SR 7122/01/2019 12:23:39
avatar
240 forum posts
61 photos

The saw would be good Erfolg iv had the magic white smoke from my Proxon one sad

on

supertigrefan22/01/2019 14:12:06
avatar
685 forum posts
5 photos
Posted by Erfolg on 22/01/2019 12:07:08:

I had picked up previously that the table angle guage was inaccurate. I lived with this by using an adjustable set square.

Noting Nigel's comment that the table gauge is easily fixed, I went ahead and examined how it could be done.

It just took a carefully handled scalpel, to ease under the stuck on label which is heavy gauge foil, remove by sliding along carefully. Set the table to 90 degrees using engineers set square. Position the gauge to the zero-zero, Stick back in. The hardest part then was cutting through the excess foil with a Stanley knife...……...

Then there is the 3D printer, come on Lidl and Aldi, we the masses need the them. crying 2

These tools are just so useful, I could almost produce a quality model using them

Edited By Erfolg on 22/01/2019 12:11:05

Edited By Erfolg on 22/01/2019 12:11:41

 

Any good? **LINK**

I just used masking tape over the scale and marked the angles I use most.

Cheap table saw http://www.ebay.co.uk/i/332598450347?chn=ps

 

 

Edited By supertigrefan on 22/01/2019 14:19:26

Geoff Sleath22/01/2019 15:58:11
avatar
3145 forum posts
247 photos

I find the sander very useful for making properly angled triangular stock when reinforcing firewalls or wing captive nut supports (when I can work out which way to sand the angles!). It is a very useful tool for making close fitting parts actually close fitting.

Geoff

supertigrefan12/02/2019 09:54:30
avatar
685 forum posts
5 photos

They're back in stock if you missed out last time.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Overlander
Slec
Airtek Hobbies
Wings & Wheels 2018
electricwingman 2017
Revoc
Gliders Distribution
Motion RC
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
Which part of building a new traditional balsa aeroplane do you enjoy the most?
Q: Which part of building a new traditional balsa aeroplane do you enjoy the most?

 Research & choosing the model
 Building the fuselage
 Installing the engine and radio systems
 Building the flying surfaces
 Covering/painting/finishing
 All of it!
 None of it. I'd rather someone else did it!
 Other

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us