By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

Hitec Flash 8

All Topics | Latest Posts

Search for:  in Thread Title in  
Glenn Stevenson24/05/2018 17:20:04
36 forum posts
2 photos

Hi, I have decided to try the hitec flash 8 tx, i bought a couple of Ikonnic ka6 receivers with it to try, Has anybody got any tips on binding these?



RC Plane Flyer24/05/2018 19:09:28
616 forum posts
22 photos

Hi Glen I assume it looks like transmitter set to binding and then hold down button on Receiver and switch battery on

I am not sure which receiver to select on Transmitter again I assume it could be Minima

Glenn Stevenson01/06/2018 06:50:37
36 forum posts
2 photos

Thanks, they bind quite easily, range check at well over 30 metres, only cost 10 quid for the 6 channel variety.

So far they seem to work well.



Steve Houghton 101/06/2018 09:37:22
1882 forum posts
128 photos

Glad to hear they work well as I'm considering buying one. In fairness, all of the non Hitec receivers I've used have bound well to my A9 and keep a rock solid link with the TX with no loss of signal #scarybumclenchingmoments

iqon01/06/2018 15:45:05
1444 forum posts
239 photos

glad to hear that also , i bought 2 rx in a sale to try with flash 8, but havent done so yet

Geoff Jackson01/06/2018 16:02:56
160 forum posts
3 photos

Ikonnik 6 works well in my Flitezone Beaver and Aurora 9. No probs thus far.

John Tee14/07/2019 19:33:46
753 forum posts
65 photos

I had trouble binding the Ka6 Rx's with my Eclipse pro 7, but no trouble whatsoever binding to the Flash 8 I bought only last week. (have to go into the Spectra menu and select Minima Rx).

One query I have someone may help me with. On the Tx there are the usual trim buttons for the normal four controls on the sticks, and there are two more called Left digital trim and Right digital trim (top centre of Tx). The only reference to these I can find are on page 11 of the manual in a list of icon ID's. Here they are called left/right "non setted extra digital trims" . I have searched throught the manual and can find no other reference to these trims. Can anyone tell me what they are for? please. Thanks in advance.


RC Plane Flyer14/07/2019 19:49:16
616 forum posts
22 photos

Hi. These trims are for channel 7&8 I only find this out from an early review

John Tee14/07/2019 21:02:41
753 forum posts
65 photos

Thanks RC Plane Flyer. Obvious when explained. sadsadsad. Must be in the manual somewhere I suppose.


All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Addlestone Models
Wings & Wheels 2019
Cambridge Gliding Club
Gliders Distribution
Pepe Aircraft
electricwingman 2017
Advertise With Us
Latest "For Sale" Ads
Does your club have a safety officer?
Q: Does your club have a safety officer, or is the emphasis on individual members to each be their own safety officer?

 Yes we have a SO
 No, it's down to everyone

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us