By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

2018 PSSA Mass Build - The Completed Model Thread

All Topics | Latest Posts

Search for:  in Thread Title in  
Phil Cooke28/07/2018 19:29:19
avatar
2256 forum posts
1541 photos

With just 6 weeks left to run until we stage our 2018 Mass Build event at the Great Orme 9th September, I'm conscious there are some models completed or fast approaching completion already - whilst others still have some significant work to do!!

I'm hoping this thread might generate a little excitement ahead of the meet and help motivate us all to the finish line...

A place to post a photo or two of your finished Hawker Hurricane!

Please keep the posts brief - add a little description of the model, maybe describing the chosen subject, the type of finish, achieved AUW, R/C channels and any special features etc.

I'll make a start by adding a photo of the prototype model built and now finished ready for the event by Matt Jones.

matts finished prototype.jpg

The model is finished as P3069 - An early Mk1 example from 303 Sqn based at RAF Northolt in September 1940.

The model is painted using airbrushed enamels over the original silver Solarfilm which was Prymol etched. The pilot and exhaust stubs are made by Real Model Pilots (1/9th scale) and the decals are from Pyramid Models. The models AUW has increased a little with these additions towards 3lb.

Brian Boucher29/07/2018 14:23:09
avatar
14 forum posts
7 photos

Just exhaust to add colour scheme 1940 experimental camflouge finished in oratex and spray painted finished AUW is 4Lb. 1 Oz abit on the heavy side but should be ok had to add 1Lb 1Oz of lesd.

hurricane

Peter Garsden06/08/2018 08:18:18
avatar
1580 forum posts
1168 photos

Here ya go - now finished and weighed this am at 1093gm or 37.3oz - can't be right but there you go. Did check it twice and the scales.

20180806_070439.jpg

20180806_070554.jpg

20180806_070711.jpg

Oh yes it was finished in 25gram fibreglass cloth, Ezekot water based resin, then white undercoat and Tamiya rattle cans and airbrush - light sand, nato brown, and Luftwaffe light blue. Special feature - air cooler at the front and detachable magnetised guns on pieces of elastic. And a lorra lead in the spinner.

Edited By Peter Garsden on 06/08/2018 08:21:39

Peter Garsden06/08/2018 20:16:54
avatar
1580 forum posts
1168 photos

Sorry chaps just to dispel rumours that I can't weigh anything accurately, I have now weighed the Hurricane again accurately and the correct weight is 50.3 oz or 4lb 2oz That is more like it.

So what does that make the wing loading please someone with a bit of gumption because I just couldn't work out the surface area of an eliptical wing?

Also forgot to mention that the decals came from Tim at Modelmarkings.com Thanks Tim.

Bryan Tucker07/08/2018 15:29:52
avatar
16 forum posts
4 photos

I thought I'd finished my Hurricane but just discovered I haven't glued the aileron hinges in either the wing or the ailerons! I'll have to juggle WD40 on the pivots whilst carefully dropping superglue in the right places.

My ready to fly weight is 1.56kg, that's 55oz in the old money or 3lb 7oz, .

I reckon that landings are going to be fun - as soon as the radiator touches down all the extra lead fitted in the battery box will cause the air-frame to roll forward and to do a nose stand! I think it best to postpone my maiden flight till the Great Orme event in September.

p1010035.jpg

p1010037.jpg

Phil Cooke16/08/2018 19:26:21
avatar
2256 forum posts
1541 photos

Posting here on behalf of Steve Kemp, who has just finished his Hawker Sea Hurricane IIc.

Steve's model is finished to represent NF672 'Nicki' from 835 Sqn FAA operating from HMS Nairama in 1944.

steve kemps 1.jpg

The model is finished in Solarfilm, etched then painted in acrylic and enamel paints. Steve has used decals from Callie Graphics and the weathering is applied using charcoal pencil dust under a coat of clear lacquer. Exhaust stacks are 3D printed by Andy Meade.

steve kemps 2.jpg

AUW is reported as 3lb 13oz. Great job Steve she looks superb!!

steve kemps 3.jpg

Trevor16/08/2018 20:18:02
avatar
381 forum posts
53 photos

Magnificent!

Trevor

Alan Gorham_16/08/2018 20:33:20
avatar
965 forum posts
102 photos

Some good looking Hurricanes so far!

Andy Meade17/08/2018 14:27:39
avatar
2614 forum posts
679 photos

Cor, what a bevvie of beauties yes

Grange Lawrenson27/08/2018 20:28:48
avatar
1 forum posts

Hi everyone

Can somebody please confirm what the C.G. for the Hurricane is? If I balance at 70mm from L.E. my model is weighing in around 5lb.

Any input would be welcomed.

Callsign Tarnish27/08/2018 21:46:28
avatar
80 forum posts
1 photos
The C.G. is definitely 70mm from the L.E. with models averaging 4lbs, do you know why yours is a pound over?
dirk tinck30/08/2018 22:40:59
avatar
235 forum posts
399 photos

looking great Steve !

steven kemp02/09/2018 07:13:26
avatar
7 forum posts
Thanks Dirk.just pray we get the weather to maiden these lovely finished models.see you next weekend.have a safe journey over.steve
dirk tinck02/09/2018 13:40:32
avatar
235 forum posts
399 photos

wink 2 Thanks Steve !

Steve McLaren02/09/2018 20:43:27
avatar
218 forum posts
231 photos

Actually it's not really completed - I still need to connect some linkages and balance it - but this is how it will look next weekend.

It's very basic - no lights, no cannons, no scale details, but it's almost finished and ready to fly, if we get some wind!

dscf1814.jpg

Phil Cooke02/09/2018 21:23:05
avatar
2256 forum posts
1541 photos

Looks lovely that Steve - and snuck in from nowhere too - out of the sun!!

Do let us know please what she weighs in at once you have it balanced thumbs up

Andy Meade04/09/2018 08:37:00
avatar
2614 forum posts
679 photos

Stick a fork in it - she's done! Well...almost. Just the tail wheel to mount and the aerial wire to string. Near enough. Not the best light this morning as it just started raining. 4lb 6oz AUW.

20180904_075555.jpg

20180904_075619.jpg

20180904_075640.jpg

Phil Cooke04/09/2018 08:51:20
avatar
2256 forum posts
1541 photos

Great looking Hurricane - another one reaches the finish line!! We should see a number arriving on here this week on the final run up to the event - who will be next!?!?

steven kemp04/09/2018 09:56:26
avatar
7 forum posts
I say it's a race between you and Chris Phil for next completed model pics..get a move on lads..4 days to go.gulp
Peter Garsden04/09/2018 10:09:25
avatar
1580 forum posts
1168 photos

Nice Andy - I will put my money on those guns lasting one flight. All mine except 1 came off mid flight, and I am making some more for static display only. Same weight as mine. Flies like a dream if you use Matt's suggested settings.

And some nice weathering.

Next time try free hand airbrushing. Saves a lot of time and masking.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Pepe Aircraft
Gliders Distribution
Cambridge Gliding Club
Wings & Wheels 2019
electricwingman 2017
CML
Slec
Sarik
Advertise With Us
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us