By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

Comper CLA-7 Swift

All Topics | Latest Posts

Search for:  in Thread Title in  
Bernd Lewerenz27/10/2018 08:32:14
avatar
346 forum posts
200 photos

20181027_090038.jpgHi, I would like to describe the construction of the comper swift by Philip Kent.

Wingspan 54"

Engine up 200Watt

Lipo 3S/1300mA20181027_085839.jpg

Bernd Lewerenz27/10/2018 08:35:14
avatar
346 forum posts
200 photos

I startet by building the fuselage.Built up with 3/16 balsa or 5X5mm Balsa.20181026_182842.jpg

Bernd Lewerenz27/10/2018 08:36:43
avatar
346 forum posts
200 photos

Wooden pack and plan from Sarik

Former Member27/10/2018 20:05:56
3578 forum posts

[This posting has been removed]

Percy Verance27/10/2018 20:36:27
avatar
8108 forum posts
155 photos

There's also one in the Shuttleworth Collection at Old Warden. That one has the geared Pobjoy radial too.

The Dennis Bryant 1/4 scale plan shows both the Pobjoy and Gypsy variants, and either can be built from that plan.

Edited By Percy Verance on 27/10/2018 21:04:47

Romeo Whisky28/10/2018 08:47:41
721 forum posts
202 photos

Here's a photo I took of a Comper Swift back in the early 1960s when I was ...er... much younger! I think this must have been at Sywell, but I can't be sure.Comper CLA7 Swift

Bernd Lewerenz28/10/2018 13:10:58
avatar
346 forum posts
200 photos

20181028_100726.jpg

Bernd Lewerenz28/10/2018 13:16:16
avatar
346 forum posts
200 photos

Hi together,

I started building the stabilizer. Vera, my wife is cutting all stripes and rips by proxon-mashine.I"am shure, she was standing upright, when I have taken this picture.She is now working and I have to invite her for dinner.Nothing is free of course.

Bernd Lewerenz29/10/2018 09:20:14
avatar
346 forum posts
200 photos

20181028_095443.jpg

Bernd Lewerenz29/10/2018 09:31:40
avatar
346 forum posts
200 photos

A baseplate, contained in woodenpack, is pined of a flat board of hard balsa.The aluminium ruler makes a straight line.

With a soft pencil I have drawn the lines for stripes and rips

Bernd Lewerenz29/10/2018 09:35:08
avatar
346 forum posts
200 photos

20181028_100551.jpg20181028_091249.jpg

Bernd Lewerenz29/10/2018 09:39:56
avatar
346 forum posts
200 photos

Bevore i glued the the bala 5X5mm in front of the stabalizer, the balsa was in water for 2 hours.So the balsa can not break through by following the radius

Bernd Lewerenz29/10/2018 09:41:41
avatar
346 forum posts
200 photos

20181029_094442.jpg

Bernd Lewerenz29/10/2018 09:58:45
avatar
346 forum posts
200 photos

after that, all rips are glued in position including a hard balsa in the middle of the stabalizer. the rips are balsastripes 2mmx5mm.I have cut them with a bigger size That makes it easier, to sand them at the same level.When all parts are dried through, I will turn around the stabalizer and make the same procedure on the opposite side.

Bernd Lewerenz29/10/2018 10:07:53
avatar
346 forum posts
200 photos

I must stop here, because Vera has called me for lunch.It is better I go immediately.I know her.smiley

By the way.I excuse me for my bad english.I" hope, you understand, what I mean im my discription.

By

Gothiquity29/10/2018 18:50:01
25 forum posts
27 photos

Excellent work so far Bernd. I have thew same Sarik plan and kit waiting to built,, don't think mine came with the balsa core for the tail-plane though. Really looking forwards to how you tackle yours , but so far you have made a great start.

 

Always adviseable to listen to SWMBO

Edited By Gothiquity on 29/10/2018 18:50:34

Gothiquity29/10/2018 21:34:10
25 forum posts
27 photos

big oops moment for me Bernd just checked my wood pack and the tail-plane balsa core is there. your fuselage image ha already helped me out as there one piece i could quite see where it went ,so keep up the good work, your really making good progress.

Former Member30/10/2018 01:38:49
3578 forum posts

[This posting has been removed]

Bernd Lewerenz30/10/2018 09:56:49
avatar
346 forum posts
200 photos

Thanks for all kind comments.So it makes much fun, to continue my report about the comper. I am missing some important details in the plan.So it is not descripted, where the batterie should be placed, for example.So I have to use the part between my ears in headdisgusthot.

Meanwhile the glue is dried and i will continiue building the comper.

By

Gothiquity30/10/2018 18:23:52
25 forum posts
27 photos

hi Bernd

there is an indication where the battery should go marked on the plan , directly below the hatch. If it isnt on your plan let me know and i'll send you a photo of where it is marker on mine.

don't worry about using the old grey matter , that's half the fun trying to figure out where things go, no clear markings on my plan for servos, RX etc, but hey i'm sure i'll figure it out to achieve the correct COG

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Sussex Model Centre
CADMA
Slec
Wings & Wheels 2019
CML
electricwingman 2017
Cambridge Gliding Club
Advertise With Us
Sarik
Latest "For Sale" Ads
Do you use a throttle kill switch?
Q: This refers to electric-powered models but do you use a throttle kill switch?

 Yes
 No
 Sometimes
 Rarely

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us