By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

Sequencer question

All Topics | Latest Posts

Search for:  in Thread Title in  
DIGGER10/01/2019 07:45:38
103 forum posts
1 photos

I have a DX8E and want to use the sequencer program, has anyone else tried this. What I want to do is turn the lights on when the wheels are down and off when the wheels are up, all from the same Y lead off the Aux2 port. Any help please.

Denis Watkins10/01/2019 09:49:27
3276 forum posts
148 photos

Digger, do you mean MIXER, to mix AUX2 ?

As I think only the DX18 has a Sequencer

DIGGER10/01/2019 10:41:29
103 forum posts
1 photos

The DX8E version 1.22 has the Sequencer on it also.

Chris

David P Williams10/01/2019 10:43:28
avatar
781 forum posts
275 photos

Digger - you can't sequence things on a Y lead on the same channel. You just need one of these to control the lights. I do this all the time, usually to have the lights come on when flaps are lowered (fixed undercarriage!)

MaL10/01/2019 11:01:05
avatar
125 forum posts
13 photos

How about a simple microswitch operated by an undercarriage leg when it reaches the fully up position?

DIGGER11/01/2019 06:37:54
103 forum posts
1 photos

I have been told you can use the sequencer on a Y lead. But I can't ,so I'm getting a switch and see if that will work. I have another bigger problem regarding the DX8E programming, but I will start another thread for this. Thank you all.

Chris

John Lee11/01/2019 13:18:32
579 forum posts
43 photos

Chris

You may want to download the manual here for the Dx9. On page 29 there are the instructions for the sequencer that are missing from the Dx8e manual.

DIGGER11/01/2019 16:41:46
103 forum posts
1 photos

John, thank you so very much for that, it's a great help. I can keep the wheels as is, and rename the doors as LED and use it to do what I want. That's the plan, watch this space. And thanks to all.

Chris

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
Gliders Distribution
electricwingman 2017
Wings & Wheels 2018
Slec
Motion RC
CML
Overlander
Airtek Hobbies
Revoc
Advertise With Us
Sarik
Latest "For Sale" Ads
Which part of building a new traditional balsa aeroplane do you enjoy the most?
Q: Which part of building a new traditional balsa aeroplane do you enjoy the most?

 Research & choosing the model
 Building the fuselage
 Installing the engine and radio systems
 Building the flying surfaces
 Covering/painting/finishing
 All of it!
 None of it. I'd rather someone else did it!
 Other

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us