By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

aliphatic bond

All Topics | Latest Posts

Search for:  in Thread Title in  
Tony Hobson17/07/2019 12:30:13
17 forum posts

Hi Guys,

I have to correct my latest bonding error, no, not my wife. Does anybody know a way to break a joint bonded with aliphatic please ? Thanks in advance.

Tony

Don Fry17/07/2019 12:58:55
avatar
3735 forum posts
42 photos

Soaking in acectone, vinegar and water mix will soften it. Steaming will also soften it.

Otherwise, it's a fine glue

will -017/07/2019 14:13:40
avatar
553 forum posts
19 photos

Soak in water usually works for me. Depends how deep it goes!

Jason Channing17/07/2019 14:48:13
87 forum posts

Ive got glue in my wifes hair , does that mean I have to drown her to get it out or at least soak her in vinegar, that would make her pickled ?

Don Fry17/07/2019 14:57:18
avatar
3735 forum posts
42 photos

That, comrade, is going to cost you. I would reduce the damage with an offer of a hairdo, a pedicure ( distraction therapy). Check the terms of your will.

john s17/07/2019 17:59:09
59 forum posts
2 photos

I'd try steam Jason, just use some protective clothing and gloves to make sure you don't burn yourself.

Peter Miller17/07/2019 18:12:19
avatar
10016 forum posts
1185 photos
10 articles

Do not use heat. Aliphatic resin polymerises with heat and then never comes apart.

If one applies the glue to bother surfaces and allows it to dry one can then bond them with a domestic iron.

I have bonded leading edge sheet to a wing by this method which I learned from an American mag years ago

paul d17/07/2019 19:06:18
34 forum posts
3 photos

That's interesting Peter, thank you! I presume it could then be used for "iron on coverings" such as litespan?

Percy Verance17/07/2019 19:16:06
avatar
8109 forum posts
155 photos

Some types of PVA have been used as a substitute for Balsaloc........

Don Fry17/07/2019 19:50:12
avatar
3735 forum posts
42 photos

But when hot, it is plastic. The post asks, how to part a joint.

Bruce Collinson17/07/2019 20:03:32
379 forum posts

Andy Hardman still had Balsaloc a week or two back. I still can’t persuade him to tell me what’s in Prymol though.

BTC

Peter Miller17/07/2019 21:04:32
avatar
10016 forum posts
1185 photos
10 articles
Posted by paul d on 17/07/2019 19:06:18:

That's interesting Peter, thank you! I presume it could then be used for "iron on coverings" such as litespan?

Possibly.I have never tried that but it sounds logical.

 

I just bought some Balsaloc for something else

Edited By Peter Miller on 17/07/2019 21:06:39

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Support Our Partners
Addlestone Models
CML
Pepe Aircraft
Wings & Wheels 2019
Gliders Distribution
Cambridge Gliding Club
electricwingman 2017
Slec
Advertise With Us
Sarik
Latest "For Sale" Ads
Does your club have a safety officer?
Q: Does your club have a safety officer, or is the emphasis on individual members to each be their own safety officer?

 Yes we have a SO
 No, it's down to everyone

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us