By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

DB Auster J1.

In process of building.

All Topics | Latest Posts

Search for:  in Thread Title in  
David Barker 206/08/2019 20:15:42
22 forum posts
14 photos

Anyone out there building a DB Auster J1 in the Basingstoke (Hampshire Area).? As ground to a halt. Help needed. Tea & Biscuits supplied.

Limobob08/08/2019 21:02:59
60 forum posts

I have a DB Auster all but finished, a great model from Dave Boddington.

Whilst building mine i referred many times to a series of posts by ‘Dwain Dibley’. This chap is a real master and helped me tremendously.

he is still about on the forums and i think is at present building a Brian Taylor Cessna. You may be able to PM him and i am sure he would be willing to help.

Good luck, a very nice big model which should fly like a dream. My first full size flight in an Auster 5 way back around 1956 if my memory serves me well. All along the coast from lovely Shoreham Airport, and the cost,...just one English Pound, now that really does show my age. G-ANHR by the way which i believe still survives but needs some TLC.

Dwain Dibley.09/08/2019 14:23:07
avatar
1521 forum posts
1506 photos

Only just seen this. PM sent David. yes

D.D.

Dwain Dibley.10/08/2019 12:37:46
avatar
1521 forum posts
1506 photos

Pics for you David.

D.D.

auster glazing 003.jpg

auster glazing 001.jpg

auster glazing 002.jpg

auster glazing 004.jpg

auster cockpit detail5 002.jpg

Wings.

auster wing 3   001.jpg

auster wing 3   002.jpg

auster wing 3   003.jpg

auster wing 3   004.jpg

auster wing 3   005.jpg

auster wing 3   007.jpg

Graham R10/08/2019 21:49:38
364 forum posts
26 photos

Who’s been a busy boy then? Looking very nice DD.

Edited By Graham R on 10/08/2019 21:50:23

ian ludwell29/04/2020 11:19:52
avatar
128 forum posts
85 photos

to Dwain Dibley,

having trouble with The Auster front glazing.

I know its some time since you built yours.can you remember if the glazing had to be cut to fit?

I have fitted the glazing either side as per your pics but the glazing will not fold back over the ribs on the fuz side without trying to spring out at either side under the ribs.

many thanks

Piers Acland29/04/2020 22:33:11
avatar
18 forum posts
4 photos

Hi Ian,

I built the DB Auster a couple of years ago. Flew like a dream. However I had problems with the front glazing. Several failed attempts (using additional polycarbonate(?) sheet purchased elsewhere) for much the same reasons as you describe. Solution was a combination of very careful cutting and softening the sheet with a heat gun to get it to adopt the right profile (upon cooling). Hope that helps.

Piers

Dwain Dibley.29/04/2020 22:35:57
avatar
1521 forum posts
1506 photos

Hello Mate,

Yes I am afraid it was a great deal of trial and error to get the glazing around those ribs. If you look at pic one and then pic five you will see that I had to take out even more on the final fit. A bit, and I stress, A BIT, of heat from a hair dryer helps with the bending.

Hope that helps bud. Post a few pics of how you are doing.

Ahh Piers beat me to it.  laugh

Cheers

D.D.

Edited By Dwain Dibley. on 29/04/2020 22:37:15

Chris Stevenson11/05/2020 07:42:59
38 forum posts
10 photos

Hi Dwain,

I am currently battling with the front glazing on the DB Auster and your pictures a great help thanks. Did you glue the top glazing in place or use screws as in the front? Two separate kit reviews I have are not that clear to me. I would prefer not to glue but cannot see where I could screw it down. Thanks, Chris

Dwain Dibley.11/05/2020 12:37:08
avatar
1521 forum posts
1506 photos

Hi Chris,

I dug out a couple more photos for you that show the top glazing.

There are two screws in the back, but it is mainly glued on. I use a canopy glue, there are many available, that goes clear when dry. Pins and tape help while the drying takes place. The front screen is over the top sheet at the front, to stop it lifting in the airflow.

Hope this helps you out.

D.D.

auster cockpit detail4    003.jpg

auster cockpit detail4    004.jpg

Chris Stevenson11/05/2020 19:39:21
38 forum posts
10 photos

Hi Dwain,

Very helpful many thanks, Chris

Mark Kettle 112/05/2020 07:48:00
avatar
2544 forum posts
1580 photos

I like Auster's.

Below and just a few miles from my home are some pictures outside the old factory.  Map Link:   Look for  -  ECF Ltd - on the map. 

Also look at the Auster website :-  http://www.austerhg.org/

20180605_092154.jpg

20180605_092206.jpg

20180605_092216.jpg

20180605_092227.jpg

 

 

 

Edited By Mark Kettle 1 on 12/05/2020 08:11:14

Dwain Dibley.12/05/2020 11:48:48
avatar
1521 forum posts
1506 photos

How Cool is that ??

Nice One Mark.

D.D.

David Davis14/07/2020 10:11:13
avatar
3782 forum posts
724 photos

Sorry to jump on somebody else's thread but I'm finishing off a DB Sport & Scale Auster which was given to me incomplete several years ago. The owner had gone all electric.

Just a couple of question to you Auster builders.

  1. I appreciate that considerable trial and error is required to get the windscreen into place but do you fit the windscreen before the top glazing or vice versa?
  2. Have any of you added baffles inside the cowling to cool the engine? I will be using a Laser 80 to power mine.

A lad up in the Val De Loire is making a pilot for me on his 3D printer. We have called Austin the Auster Pilot! He is to go in before all of the glazing is installed of course.

I need to plane down some pine which I bought at a local builders' merchants in order to make up the struts and finally if I make a horlicks of the windscreen fitting I can always use the flat Australian Bush windscreen like this one!

auster 2.jpg

Then again if I make a good job of it, I'll finish the model in this scheme. White Austers are pretty rare you know!

auster 4.jpg

brokenenglish14/07/2020 10:27:07
avatar
581 forum posts
30 photos

David, I'm not in the same league as the builders above, but I do have one suggestion that must have "saved" me many times.

For curved windscreens (or anything other than a flat window), never start cutting the glazing until you have a paper template that fits perfectly.

Dave Cunnington14/07/2020 10:45:28
avatar
181 forum posts
62 photos

Hi D D try Google for G-APCY, an Auster we flew in the British Eagle flying club, way way back when

I believe it's still around in Australia as VH-PCY, similar scheme.

Lovely colour scheme !

 

Rgds DC

Edited By Dave Cunnington on 14/07/2020 10:46:04

Edited By Dave Cunnington on 14/07/2020 11:01:49

David Davis14/07/2020 12:09:05
avatar
3782 forum posts
724 photos
Posted by Dave Cunnington on 14/07/2020 10:45:28:

Hi D D try Google for G-APCY, an Auster we flew in the British Eagle flying club, way way back when

I believe it's still around in Australia as VH-PCY, similar scheme.

Lovely colour scheme !

Rgds DC

Edited By Dave Cunnington on 14/07/2020 10:46:04

Edited By Dave Cunnington on 14/07/2020 11:01:49

Trouble is Dave that I'm useless at painting model aircraft so tend to go for very simple colour schemes and as my model has been covered in white Solartex, it's a substantially white scheme which I am going to go for.

auster 1.jpg

Dave Cunnington14/07/2020 16:12:06
avatar
181 forum posts
62 photos

No worries mate, I'm the same with my Puppeteer, it's hung up and waiting for inspiration

(or even more boredom) to set in !

The Auster's looking well - judging by the posts above you will soon be having fun with the canopies

Rgds DC

All Topics | Latest Posts

Please login to post a reply.

Support Our Partners
electricwingman 2017
Slec
CML
Sussex Model Centre
Sarik
Advertise With Us
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!