By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

HK Skycat?

All Topics | Latest Posts

Search for:  in Thread Title in  
SIMON CRAGG10/09/2019 23:56:24
431 forum posts
14 photos

Anybody got a HobbyKing SkyCat?.

Looks like fun!

KiwiKid11/09/2019 01:17:28
avatar
473 forum posts
468 photos

Yes it is! I take it you are referring to the FlyCat. Our very own Dom has done a neat review vid here: **LINK**

The model flies and handles very well - my only real concern is that the EDF unit (being on the cheaper side of things) is very rowdy and will cause a lot of annoyance to local folks if the model is flown in parks. It's fine for club flying, if the other members don't mind the EDF whine (see some of the comments from the vid). The modern commercial EDF units sound like jets and are really cool, so I would be interested if HK brings out an ARF version of the FlyCat sometime.

 

 

Edited By KiwiKid on 11/09/2019 01:30:14

SIMON CRAGG11/09/2019 09:00:41
431 forum posts
14 photos

Many thanks, you are right......I did mean FlyCat.

One on its way!

Not being an expert in this field, what modern EDF unit would be quieter?.

Engine Doctor11/09/2019 09:57:37
avatar
2295 forum posts
27 photos

Re the noisy EDF units, try balancing the blade. This makes the units a lot smoother and quieter . I tried this on the Hk Vampire and it sounds like a proper jet. You will need a decent balance device capable of balancing small units. I bought one fro Rapid RC cost about £10 and well worth it . Various tutorials on YouTube re balancing EDF units.

YakMad11/09/2019 10:23:03
518 forum posts

I maidened my Flycat last weekend it had the nice turbine sound I have come to expect from 12 blade fans it was not screaming like Dom's. Engine Doctor is right it just needs to be re-balanced, I did it recently with a 80mm FMS 12 blade which was screaming, took a little while but well worth it as the nice turbine sound has returned.

SIMON CRAGG11/09/2019 11:00:45
431 forum posts
14 photos

Understood.

Not having got my Flycat yet, I don,t know if it will be noisy or not.

Good info on balancing. Thx.

SR 7111/09/2019 11:56:05
avatar
280 forum posts
62 photos

It looks like a copy of the turbine powered Navy Cat, i had one of those and it flew beautifully

Until i pulled the wrong stick

Engine Doctor11/09/2019 14:33:10
avatar
2295 forum posts
27 photos
Posted by SIMON CRAGG on 11/09/2019 11:00:45:

Understood.

Not having got my Flycat yet, I don,t know if it will be noisy or not.

Good info on balancing. Thx.

Before removing the fan first try simply turning the adaptor and fan on the motor shaft a 1/4 turn at a time as this often cures the screaming out of balance noise.

SIMON CRAGG11/09/2019 15:13:28
431 forum posts
14 photos
Posted by Engine Doctor on 11/09/2019 14:33:10:
Posted by SIMON CRAGG on 11/09/2019 11:00:45:

Understood.

Not having got my Flycat yet, I don,t know if it will be noisy or not.

Good info on balancing. Thx.

Before removing the fan first try simply turning the adaptor and fan on the motor shaft a 1/4 turn at a time as this often cures the screaming out of balance noise.

I am hoping that mine is balanced 100% ok on arrival!.

If not, its a case of doing as you say, and if that does not work remove and balance.

Transformed the fans on my Hawk and Vampire.

Thanks for your help.

SIMON CRAGG20/09/2019 20:44:41
431 forum posts
14 photos

I am having a major problem with supplied esc.

As usual, no instructions as to what the "beeps" mean.

Tried downloading HK 80a instructions and nothing matches.

So cannot set up throttle or even put it back to default.

Can anybody help please as getting FO with it!

p1080871 (2).jpg

Denis Watkins20/09/2019 20:58:43
3875 forum posts
58 photos

Simon, this esc is for air, land and helicopter models

Where much of the programming is not needed,

For fixed wing, maybe the prop brake on or off

The " mode " is switched on by moving the throttle from high to low

If your initial throttle is sensed as reversed, then you are chasing a moving target

Try reversing the throttle ( without the prop on ever )

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
electricwingman 2017
Cambridge Gliding Club
Wings & Wheels 2019
Gliders Distribution
Slec
CML
Pepe Aircraft
Advertise With Us
Sarik
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us