By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

used Rx

All Topics | Latest Posts

Search for:  in Thread Title in  
Trevor Grace 120/09/2019 08:45:49
26 forum posts

can i change the channel of a used Rx with my DX7 as i cant remember the channel it was origenaly set up to.

Brian Lambert20/09/2019 08:50:37
avatar
339 forum posts
6 photos

I am not sure what you want to do, 2.4GHz systems are not channelized, you just need to bind the receiver to the transmitter.

CARPERFECT20/09/2019 09:02:44
avatar
483 forum posts
7 photos

Trevor. Try explain what you are trying to do please. As the question makes no sense at all. Are you new to the hobby ?

Trevor Grace 120/09/2019 09:17:57
26 forum posts

not sure what channel it was origanly used on and cant get it to rebind .may be easier to buy a new Rx.

Nigel R20/09/2019 09:39:14
avatar
3046 forum posts
475 photos

2.4GHz systems don't have "channels".

Is your problem actually that the bind process is failing?

Try it outdoors, with the TX about 10 or 20ft from the RX.

Don Fry20/09/2019 09:41:31
avatar
3911 forum posts
42 photos

Trevor, are you saying, can I change the model memory of a RX used with my DX7.?

kc20/09/2019 09:43:51
6032 forum posts
168 photos

Have you fitted the Bind plug when trying to bind?  ( Bind plug for Spektrum is a Rx plug with a tiny streamer attached)

Edited By kc on 20/09/2019 09:45:36

CARPERFECT20/09/2019 10:04:17
avatar
483 forum posts
7 photos

OkTrevor. so you need to re bind the rx ? Is it the same rx that was bound to the DX7 ? Have you done any software updates ? Is the tx and rx batteries fully charged ?Any Spektrum users please expain how to bind the rx to his DX7.

Trevor Grace 120/09/2019 10:09:58
26 forum posts

Hi Don Fry, YES

CARPERFECT20/09/2019 10:14:26
avatar
483 forum posts
7 photos

ARR so you want to use the rx with another plane ? Yes ? answer is yes . re bind the rx. Spectrum has model match. for safety. so you can not fly the wrong model. and the memory is in the tx not the rx.

 

Edited By CARPERFECT on 20/09/2019 10:24:38

Martin Harris20/09/2019 10:53:32
avatar
8793 forum posts
215 photos

I don't know Spektrum well but could there be any issues around transmitter compatibility - i.e. DSM2/DSMX modulation - or, given the lack of info re. the OP's experience, is the receiver actually a Spektrum (or compatible) one? For those used to 35MHz PPM interoperability the concept of dedicated receivers for proprietary systems may be new...

Please supply details of your "new" receiver.

 

 

Edited By Martin Harris on 20/09/2019 10:58:45

Don Fry20/09/2019 10:57:57
avatar
3911 forum posts
42 photos

Switch on transmitter, go to the memory you want to bind the receiver to. Enter the menus, go to system setup, and one of the options is bind. Scroll to the bind box, but don't press it yet.

put a bind plug in the receiver, and power it up. Make sure that it has no propellers attached if in an airframe. The receiver should be flashing rapidly.

If so walk away, minimum 2 meters, better 4 plus. Press the bind box. It will then bind or fail.if it fails try again, with the transmitter in a different place.

Power down receiver. Remove bind before you power it up again or it will go into bind mode again.

CARPERFECT20/09/2019 11:26:45
avatar
483 forum posts
7 photos

Hope that works for him Don.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
electricwingman 2017
Cambridge Gliding Club
Wings & Wheels 2019
Gliders Distribution
Slec
CML
Pepe Aircraft
Advertise With Us
Sarik
Latest "For Sale" Ads
New Poll - Sticky situations...
Q: How often - when using superglue - do you end up with it on your fingers?

 Every time
 Occasionally
 Sometimes
 Rarely
 Never
 Wear rubber gloves

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us