By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

Svenson Mini Boy

All Topics | Latest Posts

Search for:  in Thread Title in  
David Still 116/11/2019 17:00:06
avatar
49 forum posts
16 photos

I have been given this kit it looks complete does anyone know it have any info I'll do an electric conversion when I get round to building it.

Mini boy kit

Dave

Don Fry16/11/2019 17:11:13
avatar
4557 forum posts
54 photos

Any data on the box, engine size, weight, wingspan?

Looked it up. 1200 mm span, for a Fox/ Veco 19 to 25, weight 1200 gram without RC, 1600 gram with RC ( so a lot of weoghtbto lose there today.)

Edited By Don Fry on 16/11/2019 17:24:32

Martin_K16/11/2019 17:30:42
153 forum posts

Looks like the kit was from French speaking Belgium.

kc16/11/2019 17:33:14
6427 forum posts
173 photos

A Google search reveals a few adverts on e-bay etc and a reference to it being a smaller version of the FlyBoy. There is a Fly Boy plan on Outerzone. I have often wondered why planes are named with Boy at the end - HiBoy, Lowboy etc - must be some connection I suppose.

David Still 116/11/2019 18:59:15
avatar
49 forum posts
16 photos
Posted by kc on 16/11/2019 17:33:14:

A Google search reveals a few adverts on e-bay etc and a reference to it being a smaller version of the FlyBoy. There is a Fly Boy plan on Outerzone. I have often wondered why planes are named with Boy at the end - HiBoy, Lowboy etc - must be some connection I suppose.

Yes I saw on the box it is a small version of the Flyboy

The tail is all ¼" sheet and supplied pretty hard that will be replaced with built up items. Also alot of weight in the wings with bell cranks pulleys etc. which will be replaced with a couple of servos and a few other nips and tucks will shed some excess, from what I've seen it's probably a mid 70s model.

Dave

McG 696916/11/2019 19:43:16
avatar
3177 forum posts
1199 photos
Posted by Martin_K on 16/11/2019 17:30:42:

Looks like the kit was from French speaking Belgium.

Apologies, Martin, but not 'French speaking Belgium' at all.

Most of the Svenson kits were designed by Leon Jansens and were produced near Bruges and later in Knokke at the seaside.

Which makes them typical Flemish origins, I guess... wink

By the way, the majority of Svenson's plans include a build manual/guide in Flemish, French & English.

Good luck with your build, David. yes

Cheers

Chris

Don Fry19/11/2019 10:22:40
avatar
4557 forum posts
54 photos

David, no response to your question, electric conversion.

Its might be because the people who can help you haven't picked up on the thread, mistaking it for a reminiscence of an old kit. Perhaps is you did a new thread Electric Conversion of ................

include the data I supplied, it's the numbers they will need. I'm a petrol head and behind my skill set.

Former Member19/11/2019 11:14:16

[This posting has been removed]

Anthony Scott 219/11/2019 11:19:57
93 forum posts
12 photos

I built mine in 1982 too, I powered it by an Irvine 20 & it flew well.

Jim Carss19/11/2019 11:43:36
avatar
2095 forum posts
84 photos

Just found a couple of old photos of mine from close on 40yrs, ago,these are photos of the old photographs so the quality is lacking.

Mini BoyMini Boy 1

Peter Miller19/11/2019 14:02:45
avatar
10966 forum posts
1272 photos
10 articles

The Fly Boy was a great model. We had two in the club.

For electric conversion info phone George at 4-Max. Give him size, weight etc and he will tell you the best combination

**LINK**

Jesus Cardin19/11/2019 14:31:05
69 forum posts
17 photos

When I plan making an electric conversion, I always use the same approach: I take the propeller and rpm´s for the suggested glow engine and just search for a brushless motor capable of moving a similar size electric propeller at near as possible to the glow engine regime using a 2S or 3S battery for small models, 3S or 4S for medium ones and 4S or 6S for bigger´s (I have not attempted over 6S yet!).

If possible I always prefer the smaller battery for size/weight reasons and after finding the suitable brushless motor, I take notice of the needed current for buying an adequate ESC with at least a +20% plus current capability.

With this procedure you will always be success and even have a current capability margin for trying different propellers from that initially considered.

By the way, the Svenson brand was considered top notch here in Spain although prices made these models near unreachable ad only available to just more rich R/C modellers. Some time after production ceased in Belgium, a Spanish firm bought the brands and designs and still produced a selection of them till 2005 although, as far as I know, they were only offered in the Spanish market.

Best Regards.

Don Fry19/11/2019 15:20:13
avatar
4557 forum posts
54 photos

Mind, if I put my electric head on, went to the HobbyKing site, and looked up their ARTF Tundra, and ordered the recommended powertrain, I reckon it would work. Just check it's good to take the 12 inch prop this powertrain uses.

2200,minimum 30C, 3s lipo, HT 60 plug. If the stuff is bought of HobbyKing you will need a pack of HT60 plug and sockets. You will need a Velcro strap to hold the battery down.

And a spinner, 12 by 6 props. 

The build is modified, you need to build a hatch as far forward as you can get it, for the battery. Taking the wing off every flight is annoying. Battery and speed controllers all need cooling. 

Edited By Don Fry on 19/11/2019 15:26:21

All Topics | Latest Posts

Please login to post a reply.

Latest Forum Posts
Support Our Partners
electricwingman 2017
Sussex Model Centre
Slec
CML
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!