By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

Enya 45 and 15 bits needed

All Topics | Latest Posts

Search for:  in Thread Title in  
Matt Theron12/03/2020 15:03:44
80 forum posts

Hi all,

I am looking for the following Enya spares as I am sure there must be some lying about in a workshop or man drawer :-

1) Enya 45 model 6001 front engine housing.

2) 2 x Enya 15 111 model 3303 prop washers

If you have these spares please pm me and I will arrange payment etc.

yes

Matt Theron12/04/2020 12:53:00
80 forum posts
Posted by Matt Theron on 12/03/2020 15:03:44:

Hi all,

I am looking for the following Enya spares as I am sure there must be some lying about in a workshop or man drawer :-

1) Enya 45 model 6001 front engine housing.

2) 2 x Enya 15 111 model 3303 prop washers

 

If you have these spares please pm me and I will arrange payment etc.

 

 

Hi folk,

 

Could you please have another look to see if you may have these spares lying in the junk drawer

 

 

 

 

yes

 

Edited By Matt Theron on 12/04/2020 12:55:14

Edited By Matt Theron on 12/04/2020 12:55:48

Wilco Wingco12/04/2020 12:59:08
231 forum posts
3 photos

Contact Enya direct. I did a couple of weeks ago when I needed a muffler for my 90 4c. Great service and very reasonable prices, even when you have paid BT "handling charge" smiley

cymaz12/04/2020 13:10:51
avatar
9196 forum posts
1186 photos

I’ve had Enya parts direct from them in Japan. Good service

Denis Watkins12/04/2020 13:33:18
4333 forum posts
104 photos

Am guessing others like me know someone in the club with a box of bits Matt

And when we are scooting about, the box of bits can be gone through at the field.

I would of course normally do this, but both myself and the man with the box, like so many of us modellers

Are at the highest point of the graph that says "" don't touch, very fragile"

when the cloak lifts I will check it out

Jim Carss12/04/2020 13:42:33
avatar
2095 forum posts
84 photos

Matt

Just had a look in my bits and bobs and have found an Enya 40 mod.6002.in good condition,I don't know if the housings are the same as the 45.

if its any good to you let me know.

Jim

Matt Theron12/04/2020 13:43:23
80 forum posts

Thank you Wilco, Cymaz, Jim and Denis - much appreciated!

Edited By Matt Theron on 12/04/2020 13:57:04

Jim Carss12/04/2020 14:06:54
avatar
2095 forum posts
84 photos

Matt

p1080010.jpg

Matt Theron12/04/2020 15:42:43
80 forum posts

That will work thanks Jim.

Jonathan W12/04/2020 15:59:58
120 forum posts
11 photos

It's my understanding that the Enya 40 6002 has a larger diameter crankshaft (15mm) than the earlier model 6001 (1/2" or 12.7mm), so the housings are not compatible between the two models.

Denis Watkins12/04/2020 17:13:39
4333 forum posts
104 photos
Posted by Jonathan W on 12/04/2020 15:59:58:

It's my understanding that the Enya 40 6002 has a larger diameter crankshaft (15mm) than the earlier model 6001 (1/2" or 12.7mm), so the housings are not compatible between the two models.

Do you have enough dimensions available Jonathan to determine if a 15mm reamer could pass through the housing

Matt Theron12/04/2020 17:20:43
80 forum posts

I also have a Enya 40 6002 with a chunk out of the housing, so I would be able to use it if it does not fit.

Jonathan W12/04/2020 17:34:17
120 forum posts
11 photos

Hi Denis, not sure what you're getting at. A 15mm reamer would pass through the 6002 housing, since it's 15mm bore already. Are you suggesting boring out the 6001 housing to 15mm and if so, why?

I don't personally own a 6001 model Enya, though I have plenty of 6002's hanging around. The 6002 front housing is also the same as used on the SS40/45/50 ballrace engines.

Matt does not state whether his 45 6001 is ballrace or plain bearing, but both were made. The 6001 BB housing is still available: eBay

The 6001 is still popular as a control line stunt engine.

All Topics | Latest Posts

Please login to post a reply.

Latest Forum Posts
Support Our Partners
Slec
CML
electricwingman 2017
Sussex Model Centre
Advertise With Us
Sarik
Latest "For Sale" Ads
Has home isolation prompted you to start trad' building?
Q: The effects of Coronavirus

 Yes - for the first time
 Yes - but Ive bashed balsa before
 No - Ive existing projects on the bench
 No - Im strictly an ARTF person

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E!