Laser Engines development.

I recommend the type that bend over half inch before being fully home and are then beaten flat

Now you come to mention it, a fence panel looks sort of like a wing. I wonder...

What's really good about my fence panels is they look as though they already have the JON0010 airfoil section, although on closer inspection I see that some are slightly cambered.

Edited By John Stainforth on 09/07/2020 15:36:14

Annular nails, they'll cope with any vibration better, mind yer digits.

Thank you Jon, I eagerly await the first batch....

Small update on proceedings.

Petrol crankshafts have gone to be hardened and will be back...sometime. In the meanwhile i will be getting the rest of the engine on the move pending their return and manufacture of a few other parts.

The first new 160 (25cc) multi was assembled and test run today. Very much an ugly duckling at the moment due to its prototype nature but it ran very well so i hope to tart it up a bit and build some more. It also bodes well for the 30cc version of the same engine. I will probably test fly it myself quite soon and see how we go.

Put me down for a 30cc petrol, I live local (Luton) and have a Seagull Edge 540 that is currently fitted with a cheap and not very powerful or reliable 35cc petrol 2 stroke. A 30cc Laser petrol would go lovely in there and sound so much nicer.

We will definitely need a video with sound!

Show and tell Jon.

Jon

happy to beta test either petrol or glow if you’re ok with sending down under. Wot 4XL and 1/4 scale Citabria pro both available as test beds.

ted

Im ok with sending it as long as you are ok with sending it back! In fairness its very unlikely, but in the event of major drama it might need to come home.

As for show and tell..not yet. I would, but there are reasons i cant so just give me a little while longer. All will become clear.

I could also test it in a Hangar 9 Taylorcraft which has a noisy Zenoah 26cc petrol fitted

Jon

I for one can't wait to see that inline . What have you got there?

Cant say yet but can explain why.

Today i was visited by Moderator Steve to take some photos and get some info on all the goings on at Laser in preparation for a write up in RCME. Clearly, it would not be very fair to spill all the beans on here as it would damage their article.

Also, i am not ready to spill the beans anyway but should be by the time the piece in the mag goes live.

Clever eh?

Can’t wait to read all about it!

BTC

Jon, do you know when the mag article is scheduled for publication?

I dont, but even if i did i probably couldnt say

Darn the suspense is killing me..

Edited By Tony Richardson on 30/08/2020 23:39:13

Yes, Jon has been awfully quite over the last few weeks, not like him at all!