By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by CML

Precedent Stampe 1/4 Scale

build blog

All Topics | Latest Posts

Search for:  in Thread Title in  
bert baker17/06/2018 21:36:07
avatar
1155 forum posts
249 photos

img_2285.jpgThat's my weekend toys sorted

funflyerColin17/06/2018 22:05:24
avatar
80 forum posts
87 photos

Hello looking good guys hope to get there on the Sunday to see you all, must get mine out of the loft and refurbished/rebuilt. Here's hoping for some great flying weather, good luck and safe flying.

Michael Denest18/06/2018 01:29:07
52 forum posts
28 photos

And you'll post pics of the action for those of us on the west side of the pond to enjoy? Have a great event.

Jon - Laser Engines18/06/2018 09:41:13
3837 forum posts
149 photos
Posted by Michael Denest on 18/06/2018 01:29:07:

And you'll post pics of the action for those of us on the west side of the pond to enjoy? Have a great event.

I recon. If anyone has an action camera we should fit them to the models. I might put one in my vacant rear cockpit

Martin McIntosh18/06/2018 09:56:17
avatar
2456 forum posts
941 photos

That`s a point. Can`t even remember where my Mobius ones are. If I can find them and they still hold a charge then maybe on the top wing to clear the prop. arc or on the tail.

cymaz18/06/2018 17:43:21
avatar
7639 forum posts
987 photos

Been keeping a keen eye on the forecast for several days now.....it’s shaping up to be a crackerhothot

Alan Page 218/06/2018 17:48:05
14 forum posts
Let's hope so 😎
bert baker18/06/2018 20:14:42
avatar
1155 forum posts
249 photos

Shush, don't let the wet stuff know

Jon - Laser Engines20/06/2018 13:49:47
3837 forum posts
149 photos

Well if we keep talking quietly we might get away with it.

Current weather check is hot with the standard wings and wheels crosswind at 90 degrees to the runway centreline. Fortunately its not looking that strong and the sunday looks better. Either way, i hope you boys are current with your crosswind landings!

Also, for dinner i am happy to accept Martins offer of using his van as base camp. Its likely that we will all be located near eachother as they tend to group teams close together when it comes to camping. In any case i will be bringing my own burgers and whatnot and my bbq. If anyone wants some bbq grill space you are more than welcome, if not then Martin's gas powered grill is no doubt available and i was going to bring my small portable gas ring just because i can, and i was wondering if we should cook up a big pot of bbq beans on it and share it out? what is the view of the masses?

Edited By Jon - Laser Engines on 20/06/2018 13:50:40

Martin McIntosh20/06/2018 15:05:19
avatar
2456 forum posts
941 photos

That`s fine. It is a three burner hob, not a grill though. I shall be on plot 20 sometime Fri. evening.

Crosswind landings don`t bother the Stampe so much as take offs but with a patch that wide there should be no problems (says he).

bert baker20/06/2018 15:29:45
avatar
1155 forum posts
249 photos

plot 20 hello Neighbour

Some rubbing strips under the wing tips,,,,,, three layers of clear Gorilla tape perhaps,

cymaz20/06/2018 17:31:18
avatar
7639 forum posts
987 photos

We can stay on after the show , Saturday,for a bit and be sociable..depends how long we stay as what time we can get a table booked where we are staying. Will come around in the mornings to say “hi” if we get there early enough.....hotclock

Jon - Laser Engines21/06/2018 20:13:59
3837 forum posts
149 photos
Posted by bert baker on 20/06/2018 15:29:45:

plot 20 hello Neighbour

plot 30 for me

bert baker21/06/2018 20:15:09
avatar
1155 forum posts
249 photos

the walk of doom

john stones 121/06/2018 21:41:59
avatar
9597 forum posts
1428 photos

Big pot of BBq'd beans.

Good thing being 10 plots away. smiley

John Duncker21/06/2018 22:57:55
7 forum posts
7 photos

Loved my President Stampe in Penquin livery. A proper build and I am glad I bought a 120 fs for it instead of the ST 90 I had planned to use. Low passes with the motor burbling away were great.

It was great to do proper scale like take offs getting the tw off first and a gentle climb out.

Slow rolls were a treat and I loved the side slip approach with fully crossed controls.

I will add a pic when I work out how to do that.

John Duncker21/06/2018 23:05:10
7 forum posts
7 photos

Mystampe 024.jpg Stampe

Alan Page 222/06/2018 07:26:52
14 forum posts
Well the sun's out will be a good day to travel looking forward to meeting up with you all later!
Jon - Laser Engines22/06/2018 09:13:46
3837 forum posts
149 photos

Ha! cheers John. If my tent looks a little over inflated keep a safe distance and no naked lights!

My plan is still to set sail tomorrow morning. All my models have now had their inspections and maintenance and i have all my ducks in a row ready for charging batteries tonight. I aim to arrive around 8am tomorrow and get all my models put together. I will just look for a small flock of stampe's on the flightline and head that way.

Lego22/06/2018 09:32:23
avatar
14 forum posts

Good luck and safe flying to my fellow Stampers this weekend, i hope you can get some good videos posted as i cant make it.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!

Find RCM&E! 

Latest Forum Posts
Support Our Partners
CML
Wings & Wheels 2018
electricwingman 2017
Slec
Overlander
Airtek Hobbies
Expo Tools 14 July
Gliders Distribution
Sarik
Advertise With Us
Latest "For Sale" Ads
What is the main brand of transmitter you use? (2018)
Q: What is the main brand of transmitter you use?

 FrSky
 Futaba
 Graupner
 HiTec
 Jeti
 JR
 Multiplex
 Spektrum
 Other

Latest Reviews
Digital Back Issues

RCM&E Digital Back Issues

Contact us

Contact us