|Mark a||17/01/2013 13:17:21|
|321 forum posts|
A spot of advice please.
I've started to put together a ARTF acro wot and i'm going to fit an SC .61 two stroke motor in it and i was wondering what mods to the engine mount are required. I have not got the engine yet its still in the post. I don't really won't to have to start messing with the firewall so would i just need to enlarge the mounting holes on the engine mount to get the required width.
Edited By Mark a on 17/01/2013 13:33:40
|John Allen||17/01/2013 15:41:24|
217 forum posts
Yes, but you will really, really, really have to enlarge them. I fitted an ASP 91FS, same width between mounting holes are ASP 61A, and I had to drill the hole right out to the edge to get it to fit.
If you can get an adjustable mount with the holes in the right place, it would be a lot easier. I destroyed 2 mounts trying to get it right.
Please login to post a reply.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!