82 forum posts
I want to have a single connector to join the servos and retracts in the wing to the fuselage rather then having individual connectors.
I have a spare balance lead connector for a 8cell battery (9pins), would this be suitable for the currents etc that are invovled with servos?
|2529 forum posts|
have a look at this discussion connectors
82 forum posts
Thanks i completely missed the post in the thread about the balance connectors.
|Colin Bernard||13/12/2013 15:04:08|
502 forum posts
Dave, For what it is worth I used Multiplex multipin connectors for my DB Cherokee (2 servos each wing).
Worked very well. (Batteries are for the lighting unit befire I get accused of running the Rx on dry cells!)
|Chris Bott - Moderator||13/12/2013 15:11:48|
6835 forum posts
I use Ashlok connectors. Now available from Phil Clark at Fighter Aces
|176 forum posts|
I have used the Multiplex connectors on several models and they have been very good for me.
Where I have two wing halves either side of a fuselage I wire it up so the two connectors are opposite, i.e. plug on one wing half and socket on the other wing half. That way I cannot plug it together incorrectly.
Yes I know we should carefully test the setup before flying but this is just one thing that is impossible to get wrong during the setup at the field.
Please login to post a reply.
Want the latest issue of RCM&E? Use our magazine locator link to find your nearest stockist!