Forum sponsored by:

Motor Discussion

Search for: in Thread Title in

Please login to create a new thread

Please note, this topic is pre-moderated and postings will not appear until they have been approved.

<< First < Prev 1 2 3 4 5 6 7 8 9 10 11 Next > Last >>

Thread	Replies	Views	Latest Post
Replacement motor for Parkzone Radian? By Simon Hall 2	6	1691	27/07/2015 16:47:45 by Simon Hall 2
400 geared motor By John Cooper 1	16	1696	10/07/2015 20:27:13 by John Cooper 1
Motor repair is it worth it? By IanN	21	2506	08/07/2015 16:06:15 by IanN
Prop adapter play on PZ Radian By Simon Hall 2	10	1189	03/07/2015 19:27:31 by Simon Hall 2
Which Battery EDF Outrunner By Roger Cox 1	0	865	25/06/2015 16:17:00 by Roger Cox 1
what propeller for speed 600 motor advise please... By Ash N	9	1582	24/06/2015 20:04:54 by Ash N
Can you recommend a small motor? Power pod for a glider - equivalent to a Cox 0.09 By The Wright Stuff	6	1168	24/06/2015 09:48:19 by The Wright Stuff
Electrify Flair Kite Wanting to determine ideal leccie set up By Peter Roberts	12	1758	22/06/2015 18:34:37 by Old Geezer
Alternative to Emax GT2215/12 for my Lazy Bee? By Spikey	5	1572	17/06/2015 13:08:54 by IanN
Unexplained reversal of Electric Motor By John Murdy	5	1122	12/06/2015 08:15:09 by Dave Hopkin
Electric Motor Storage By Barrie Dav 2	2	1033	01/06/2015 12:15:08 by Barrie Dav 2
Motor quality v performance By Geoff Sleath	16	1507	25/05/2015 13:16:07 by A.A. Barry
Foxy 4020/10 prop choice By Geoff Sleath	3	1200	20/05/2015 22:47:09 by Geoff Sleath
What Motor For Zlin By CJD	2	871	20/05/2015 22:27:48 by CJD
Can anyone ID this motor please ? Seems to have built in ESC By Ron Wylie	8	1374	06/05/2015 22:01:46 by Max Z
Novice question on motor shaft sizes, help please By David Pearce 4	4	1017	04/05/2015 13:06:11 by kc
replacement motor By ericrw	2	1075	29/04/2015 15:36:57 by ericrw
replacing bearings in 4Max outrunner By mightypeesh	4	1377	19/04/2015 20:05:29 by RC Plane Flyer
Thrown Magnets in Motors By Stephen Jones	11	1389	17/04/2015 14:47:12 by Mowerman
Choosing motors to suit required prop size ? By john stones 1	3	1008	16/04/2015 21:41:12 by john stones 1